JVC GR-DX25 Скачать руководство пользователя

Страница: 35 / 48

TROUBLESHOOTING

The image looks like the shutter speed is too
slow.

• When shooting in the dark, the unit becomes highly

sensitive to light when “GAIN UP” is set to “AUTO” in
the Menu Screen.

If you want the lighting to look more natural, set
“GAIN UP” to “AGC” or “OFF” in the Menu Screen
(

墌

pg. 22).

White Balance cannot be activated.

• The Sepia or Monotone mode is activated.

Turn off Sepia or Monotone before setting White
Balance (

墌

pg. 16, 20).

When shooting a subject illuminated by bright
light, vertical lines appear.

• This is a result of exceedingly high contrast, and is

not a malfunction.

When the screen is under direct sunlight
during shooting, the screen becomes red or
black for an instant.

• This is not a malfunction.

The date/time does not appear.

• “DATE/TIME” is set to “OFF” in the Menu Screen.

Set “DATE/TIME” to “ON” in the Menu Screen
(

墌

pg. 23, 25).

Time code does not appear.

• “TIME CODE” is set to “OFF” in the Menu Screen.

Set “TIME CODE” to “ON” in the Menu Screen
(

墌

pg. 24, 25).

Images on the LCD monitor appear dark or
whitish.

• In places subject to low temperature, images become

dark due to the characteristics of the LCD monitor.
When this happens, the displayed colours differ from
those that are actually recorded. This is not a defect
of the camcorder.

• When the LCD monitor's fluorescent light reaches the

end of its service life, images on the LCD monitor
become dark. Consult your nearest JVC dealer.

Adjust the brightness and angle of the LCD monitor
(

墌

pg. 11).

The rear of the LCD monitor is hot.

• The light used to illuminate the LCD monitor causes it

to become hot.

Close the LCD monitor to turn it off or set the Power
Switch

to “OFF”, and let the unit cool down.

The indicators and the image colour on the
LCD monitor are not clear.

• This may occur when the surface or the edge of the

LCD monitor is pressed.

The LCD monitor or viewfinder indications
blink.

• Certain Fade/Wipe effects, certain modes of

Programme AE with special effects, “DIS” and other
functions that cannot be used together are selected at
the same time.

Re-read the sections covering Fade/Wipe effects,
Programme AE with special effects and “DIS”
(

墌

pg. 16, 17, 22).

01 DX55/45/35/25EK_EN 34-48

03.1.23, 1:43 PM

Содержание GR-DX25
















































Результаты поиска

Содержание GR-DX25

Отзывы:

Похожие инструкции для GR-DX25

Бренды по названию

Популярные бренды

JVC GR-DX25, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DX25

Отзывы:

Похожие инструкции для GR-DX25

Бренды по названию

Популярные бренды