JVC GR-DVX10 Скачать руководство пользователя страница 84

Страница: 84 / 100

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

45.

The LCD monitor, the
viewfinder and the lens have
become dirty
(ex. fingerprints).

46.

An unusual mark appears.

47.

An error indication
(E01 — E06) appears.

48.

The charger indicator on the
AC Power Adapter/Charger
does not light.

49.

Picture does not appear on
the LCD monitor.

50.

When the image is printed
from the printer, a black bar
appears at the bottom of the
screen.

51.

When the camcorder is
connected via the DV
connector, the camcorder
does not operate.

52.

During transport, the lens
cover opens.

53.

The MultiMediaCard cannot
be removed from the
camcorder.

45.

————

46.

————

47.

• A malfunction of some kind

has occurred. In this case the
camcorder’s functions
become unusable.

48.

• The temperature of the battery

is extremely high/low.

• Charging is difficult in places

subject to extremely high/low
temperatures.

49.

• The viewfinder is pulled out.
• The LCD monitor's brightness

setting is too dark.

50.

• This is not a malfunction.

51.

• The DV cable was plugged/

unplugged with power turned
on.

52.

————

53.

————

45.

• Wipe them gently with soft

cloth. Wiping strongly can
cause damage (

墌

pg. 78).

46.

• Check the section of the

manual that explains LCD
monitor/viewfinder indica-
tions (

墌

pg. 88 – 92).

47.

• Remove the power supply

(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you
can resume using the
camcorder.
If the indication remains even
though you repeat the above
two or three times, please
consult your nearest JVC
dealer.

48.

• To protect the battery, it is

recommended to charge it in
places with a temperature of
10°C to 35°C (

墌

pg. 93).

49.

• Push the viewfinder back in.
• Adjust the brightness of the

LCD monitor (

墌

pg. 16).

• If the monitor is tilted upward

180 degrees, open the
monitor fully (

墌

pg. 16).

50.

• By recording with “DIS”

activated (

墌

pg. 28) this can

be avoided.

51.

• Turn the camcorder’s power

off and on again, then operate
it.

52.

• Do not subject the camcorder

to shock or excessive
vibration during transport.

• Turn the camcorder on and

off. The lens cover closes.

53.

• Push in the MultiMediaCard a

few more times (

墌

pg. 12).

TROUBLESHOOTING

(cont.)

Содержание GR-DVX10




































































































Результаты поиска

Содержание GR-DVX10

Отзывы:

Похожие инструкции для GR-DVX10

Бренды по названию

Популярные бренды

JVC GR-DVX10, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DVX10

Отзывы:

Похожие инструкции для GR-DVX10

Бренды по названию

Популярные бренды