EN
29
To Delete Unwanted Still Images . . .
.... when unwanted still images are stored in the
memory card or its memory is full, refer to “Deleting
Files” (
pg. 34) and delete unwanted still images.
To Remove The Shutter Sound . . .
.... when you do not want to hear the shutter sound, set
“BEEP” to “OFF” in the Menu Screen (
pg. 40, 42).
The sound is no longer heard from the speaker.
NOTES:
●
Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom or Night-Alive (
pg. 48).
●
The image is stored in the VGA mode regardless of the
image size mode setting (
pg. 17) if “MULTI-4” or
“MULTI-9” is engaged.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 41), the Stabiliser will be disabled.
●
If Snapshot recording is not possible, “
” blinks
when
SNAPSHOT
is pressed.
●
If Program AE with special effects (
pg. 48) is
engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such
a case, the icon blinks.
●
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “
” or “
” and
power is supplied from the battery pack, the camcorder
shuts off automatically to save power. To perform
shooting again, push back and pull out the viewfinder
again or close and re-open the LCD monitor.
●
The Motor Drive mode (
pg. 52) is disabled when the
VIDEO/MEMORY
Switch is set to “MEMORY”.
●
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
●
Still images taken are compliant to DCF (Design rules
for Camera File systems). They do not have any
compatibility with devices which are not compliant to
DCF.
●
In the XGA mode, images are shot in 720 x 480 pixels
and they are converted and stored in the XGA mode
file size (1024 x 768 pixels).
FULL
Snapshot mode
with no frame*
PIN-UP
Pin-Up mode*
FRAME
Snapshot mode
with frame*
MULTI-4
Multi-Analyzer 4
* There is the sound effect of a shutter
closing.
MULTI-9
Multi-Analyzer 9
