EN
61
Audio Dubbing
The audio track can be customized only when
recorded in the 12-bit mode (
墌
pg. 45).
NOTES:
●
Audio Dubbing is not possible on a tape recorded in 16-
bit audio, on a tape recorded in the LP mode or on a
blank portion of a tape.
●
To perform Audio Dubbing while watching on the
television, make connections (
墌
pg. 22).
1
Play back the tape to locate the point where
editing will start, then press
PAUSE
(
6
).
2
While holding
A.DUB
(
e
) on the remote control,
press
PAUSE
(
6
). “
6e
” appears.
3
Press
PLAY
(
4
) , then begin “narrating”.
Speak into the microphone.
• To pause dubbing, press
PAUSE
(
6
).
4
To end Audio Dubbing, press
PAUSE
(
6
), then
STOP
(
5
).
To hear the dubbed sound during playback . . .
..... set “12BIT MODE” to “SOUND 2” or “MIX” in the
Menu Screen (
墌
pg. 48, 49).
NOTES:
●
Sound is not heard from the speaker during Audio
Dubbing.
●
When editing onto a tape that was recorded at 12-bit,
the old and new soundtracks are recorded separately.
●
If you dub onto a blank space on the tape, the sound
may be disrupted. Make sure you only edit recorded
areas.
●
If feedback or howling occurs during TV playback, move
the camcorder’s microphone away from the TV, or turn
down the TV’s volume.
●
If you change from 12-bit to 16-bit in mid-recording and
then use the tape for Audio Dubbing, it is not effective
from the point where 16-bit recording began.
●
During Audio Dubbing, when the tape moves to scenes
recorded in the LP mode, scenes recorded in 16-bit
audio or a blank portion, Audio Dubbing stops
(
墌
pg. 81).
●
To perform Audio Dubbing with a video unit connected to
the camcorder’s AV connector, first set “S/AV INPUT” to
“ON” in the Menu Screen (
墌
pg. 48).
e
6
PLAY
PAUSE
A.DUB
STOP
Speaker
Stereo
microphone
Audio Dub Standby
mode
Power Switch
Remote sensor
Display
1 GR-DVL822U_EN 58-75
02.5.11, 09:53 AM
61
