EN
5
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE”
is set to “ON” (factory-preset).
Available when the Power Switch is set to “
” or “
” and
no cassette is in the camcorder.
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is performed
for more than 1 minute after that, the demonstration will
resume.
“DEMO MODE” remains “ON” even if the camcorder
power is turned off.
To cancel Automatic Demonstration:
1.
Set the Power Switch to “
” while pressing down the
Lock Button located on the switch and press the
MENU/
BRIGHT
wheel in. The Menu Screen appears.
2.
Rotate the
MENU/BRIGHT
wheel to select “
SYSTEM”
and press it. The SYSTEM Menu appears.
3.
Rotate the
MENU/BRIGHT
wheel to select “DEMO
MODE” and press it. The Sub Menu appears.
4.
Rotate the
MENU/BRIGHT
wheel to select “OFF” and
press it.
5.
Rotate the
MENU/BRIGHT
wheel to select “
1
RETURN”,
and press it twice.
The normal screen appears.
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.
MODE
DEMO
–
ON
OF F
MENU/BRIGHT Wheel
Sub Menu
1
3
2
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
Lock Button
Power Switch
