background image

MasterPage: Heading0_Left

44 

EN

CAUTIONS

Battery Packs

The supplied battery 
pack is a lithium-ion 
battery. Before using the 
supplied battery pack or 
an optional battery pack, 
be sure to read the 
following cautions:

To avoid hazards

 ...

do not

 burn.

 ...

do not

 short-circuit the terminals. When 

transporting, make sure the provided battery cap 
is attached to the battery. If the battery cap is 
misplaced, carry the battery in a plastic bag.

 ...

do not

 modify or disassemble.

 ...

do not

 expose the battery to temperatures 

exceeding 60°C, as this may cause the battery to 
overheat, explode or catch fire.

 ... use only specified chargers.

To prevent damage and prolong service 
life

 ... do not subject to unnecessary shock.
 ... charge in an environment where temperatures 

are within the tolerances shown in the chart 
below. This is a chemical reaction type battery — 
cooler temperatures impede chemical reaction, 
while warmer temperatures can prevent 
complete charging.

 ... store in a cool, dry place. Extended exposure to 

high temperatures will increase natural discharge 
and shorten service life.

 ... fully charge and then fully discharge the battery 

every 6 months when storing the battery pack 
over a long period time.

 ... remove from charger or powered unit when not in 

use, as some machines use current even when 
switched off.

NOTES:

It is normal for the battery pack to be warm after 
charging, or after use.

Temperature Range Specifications

Charging: 10°C to 35°C
Operation: 0°C to 40°C
Storage: –20°C to 50°C

The lower the temperature, the longer recharging 
takes.

Charging times are for a fully discharged battery 
pack.

Cassettes

To properly use and store your cassettes, be 
sure to read the following cautions:

During use

 ... make sure the cassette bears the Mini DV mark.
 ... be aware that recording onto prerecorded tapes 

automatically erases the previously recorded 
video and audio signals.

 ... make sure the cassette is positioned properly 

when inserting.

 ... do not load and unload the cassette repeatedly 

without allowing the tape to run at all. This 
slackens the tape and can result in damage.

 ... do not open the front tape cover. This exposes 

the tape to fingerprints and dust.

Store cassettes

 ... away from heaters or other heat sources.
 ... out of direct sunlight.
 ... where they won’t be subject to unnecessary 

shock or vibration.

 ... where they won’t be exposed to strong magnetic 

fields (such as those generated by motors, 
transformers or magnets).

 ... vertically, in their original cases.

The Benefits Of Lithium-Ion Batteries 

Lithium-ion battery packs are small but have a 
large power capacity. However, when one is 
exposed to cold temperatures (below 10°C), 
its usage time becomes shorter and it may 
cease to function. If this happens, place the 
battery pack in your pocket or other warm, 
protected place for a short time, then re-
attach it to the camcorder.

Terminals

GR-DF425PAL.book  Page 44  Wednesday, January 19, 2005  9:17 AM

Содержание GR-DF425

















































Отзывы: