(No.YF020)1-13
3.2.3 DISASSEMBLY/ASSEMBLY OF [15] MONITOR ASSEMBLY
z
CAUTION
(1) During the procedure, be careful in handling the LCD
MODULE,etc., especially not to damage or soil the mon-
itor screen. If it is soiled with fingerprints, etc., gently
clean it with chamois or the cleaning cloth.
(2) Since the BACKLIGHT is soldered to the ASSEMBLY
BOARD, the BACKLIGHT should not be separated from
the ASSEMBLY BOARD except when replacing the
BACKLIGHT.
z
Disassembly procedure of MONITOR ASSEMBLY
(1) While removing the 4 screws (1-4) in numerical order
and disengaging the 6 hooks (L15a-L15f) in alphabetical
order, remove the MONITOR COVER ASSY.
(2) Remove the SENSOR BOARD ASSEMBLY from the
MONITOR CASE.
(3) Remove the FPC in CN15a and CN15b in alphabetical
order, and remove the MONITOR HINGE ASSEMBLY.
(4) Remove the FPC of LCD MODULE from 1 connector
CN15c.
(5) Remove 1 screw (5), and remove the BL BOARD AS-
SEMBLY together with the BACKLIGHT.
(6) Remove the SHEET (DIFF.).
(7) Remove the LCD FRAME.
(8) Remove the LCD MODULE.
(9) Remove the SHIELD CASE.
Fig.3-2-3
MONITOR CASE
LCD FRAME
LCD MODULE
MONITOR HINGE
ASSEMBLY
BACK LIGHT
MONITOR COVER
ASSEMBLY
SENSOR BOARD
ASSEMBLY
:0.078N
.
m (0.8kgf
.
cm)
:0.246N
.
m (2.5kgf
.
cm)
SHEET(DIFF)
BL2.5
BOARD ASSEMBLY
L15g
SHIELD CASE
L15f
5
(S15a)
L15b
CN15b
L15e
CN15a
CN15c
L15a
L15e
L15f
L15d
L15c
4
(S15b)
3
(S15b)
1
(S15a)
2
(S15a)
b
b
a
a
c
c
SD15a
SD15b
