JVC GR-D790AS, Инструкция по эксплуатации

Страница: 30 / 52

ADDITIONAL FEATURES FOR D.S.C. 30
EN
MasterPage: Left
To Print By Selecting Still Images And
Number Of Prints
1
Perform steps
1
–
3
in “To Print All Still
Images (One Print For
Each)” (
pg. 29).
2
Select “CURRENT”,
press SET or
2
. The
DPOF screen appears.
3
Press
1
or
2
to select the desired file.
4
Press
4
or
3
to select the number
indication (00), and press SET .
5
Select the number of prints
by pressing
3
to increase the
number, or
4
to decrease the
number, and press SET .
●
Repeat steps
3
through
5
for the desired number
of prints.
●
The number of prints can
be set up to 15.
●
To correct the number of
prints, select the image
again and change the number.
6
Select “RETURN”,
press SET . The “SAVE?”
appears.
●
If you did not change any
settings in step
3
through
5
, the DPOF
Menu reappears.
7
Select “EXECUTE”, press SET .
●
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
1
–
3
in “To Print All Still
Images (One Print For Each)” ( pg. 29).
2
Select “RESET”, press SET or 2 . The
DPOF screen appears.
3
Select “EXECUTE”, press SET .
●
To cancel selection, select “RETURN”.
●
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with “DIS”
de-activated (
pg. 32) this can be avoided.
You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1
Perform steps
1
–
3
in “Normal Playback
Of Images” ( pg. 27).
2
Press MENU .
3
Select “FORMAT”, press SET
or
2
. The FORMAT screen
appears.
●
Press 1 whenever you want to
return to the previous menu
screen.
4
Select “EXECUTE”,
press SET . The memory
card is initialise.
●
When initialisation is
finished, “NO IMAGES
STORED” appears.
●
To cancel initialisation,
select “CANCEL”.
DPOF
SHEETS
RETURN
02
Select
1
Select
2
SET
DPOF
SHEETS
02
CANCEL
DPOF
SAVE?
EXECUTE
Initialising A Memory Card
1
Select
2
SET
CANCEL
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
GR-D790AS_EN.book Page 30 Tuesday, January 23, 2007 2:37 PM