background image

EN

 31

MENUS FOR DETAILED ADJUSTMENT

MasterPage: Start_Right

ADV

ANCED FEA

TURES

OFF

: Allows you to shoot dark scenes with no 

picture brightness adjustment.

[AGC]

: The overall appearance may be grainy, 

but the image is bright.

AUTO

 

: The shutter speed is 

automatically adjusted. Shooting a subject in 
low or poor lighting at slow shutter speed 
provides a brighter image than in the AGC 
mode, but the subject’s movements are not 
smooth or natural. The overall appearance 
may be grainy. While the shutter speed is 
being automatically adjusted, “

” is 

displayed. 

[OFF]

: Disengages the function.

ON

 

: Helps cut down on noise created by 

wind. The “

” indicator appears. The quality 

of the sound will change. This is normal.

* Available only when the 

VIDEO/MEMORY

 

Switch is set to “VIDEO”.

[640 x 480 F]

 / 

640 x 480 S

The Image Size mode can be selected to best 
match your needs. Two Picture Quality modes 
are available: FINE (

) and STANDARD 

(

) (in order of quality).

NOTE:

The number of storable images depends on the 
selected picture quality as well as the composition 
of the subjects in the images and the type of 
memory card being used. (

 pg. 24) 

* Available only when the 

VIDEO/MEMORY

 

Switch is set to “MEMORY”.

VTR

Available only when the 

VIDEO/MEMORY

 

Switch is set to “VIDEO”.

[SP]

*: To record in the SP (Standard Play) 

mode.

LP

: Long Play—more economical, providing 

1.5 times the recording time.
* SP indicator does not appear on the screen.

NOTES:

If the recording mode is switched, the playback 
picture will be blurred at the switching point.

During playback of a tape recorded on another 
camcorder, blocks of noise may appear or there 
may be momentary pauses in the sound.

[12BIT]

: Enables video recording of stereo 

sound on four separate channels. (Equivalent 
to the 32 kHz mode of previous models)

16BIT

: Enables video recording of stereo 

sound on two separate channels. (Equivalent 
to the 48 kHz mode of previous models)

 

(TAPE)

: When Snapshot recording is 

performed with the 

VIDEO/MEMORY

 Switch 

set to “VIDEO”, still images are recorded only 
onto the tape.

/

 

(TAPE/CARD)

: When Snapshot 

recording is performed with the 

VIDEO/

MEMORY

 Switch set to “VIDEO”, still images 

are recorded not only onto the tape but also in 
the memory card (640 x 480 pixels). 

[

 

(CARD)]

: When Snapshot recording is 

performed with the 

VIDEO/MEMORY

 Switch 

Set to “VIDEO”, still images are recorded into 
the Memory Card only. Select this setting to 
perform Dual Rec.. 

(

 pg. 20)

GAIN UP

WIND CUT*

IMAGE SIZE*

640

F

640

S

REC MODE

SOUND MODE

REC SELECT

GR-D770UC_EN.book  Page 31  Thursday, December 14, 2006  7:55 PM

Содержание GR D770 - Camcorder - 680 KP

















































Отзывы: