background image

EN

 21

VIDEO PLAYBACK

MasterPage: Start_Right

RECORDING & PLA

YBACK

 

1

Black to S-VIDEO IN (Connect when your 
TV/VCR has S-VIDEO in and AV input 
connector. In this case, it is not necessary to 
connect the yellow video cable.)

2

Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors).

3

Red to AUDIO R IN*

4

White to AUDIO L IN*

* Not required for watching still images only.

NOTE:

The S-Video cable is optional. Be sure to use the 
YTU94146A S-Video cable. Consult the JVC 
Service Centre described on the sheet included in 
the package for details on its availability. Make 
sure to connect the end with a core filter to the 
camera.The core filter reduces interference.

1

Make sure all units are turned off.

2

Connect the camcorder to a TV or VCR as 

shown in the illustration.

If using a VCR

, go to step 

3

.

If not

, go to step 

4

.

3

Connect the VCR output to the TV input, 

referring to your VCR’s instruction manual.

4

Turn on the camcorder, the VCR and the 

TV.

5

Set the VCR to its AUX input mode, and set 

the TV to its VIDEO mode.

6

Start playback on the camcorder. 

(

 pg. 19)

Please set “16:9 OUTPUT” of Playback Menus 
so that the image may suit your TV (16:9 TV or 
4:3 TV). (

 pg. 24, 25)

To choose whether or not the following 
displays appear on the connected TV

Date/Time
Set “DATE/TIME” to “ON” or “OFF” (

 pg. 25).

Time Code
Set “TIME CODE” to “ON” or “OFF” (

 pg. 25).

Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” 
(

 pg. 25).

NOTES:

It is recommended to use the AC Adapter as 
the power supply instead of the battery 
pack. (

 pg. 13)

To monitor the picture and sound from the 
camcorder without inserting a tape or memory 
card, set the camcorder’s Power Switch 
to“REC”, then set your TV to the appropriate 
input mode.

Make sure you adjust the TV sound volume to its 
minimum level to avoid a sudden burst of sound 
when the camcorder is turned on. 

Connections To A TV Or VCR

TV

VCR

To AV 
connector

Audio/Video 
cable
(provided)

S-Cable
(optional)

or

GR-D750AS_EN.book  Page 21  Tuesday, January 23, 2007  5:33 PM

Содержание GR-D750AS









































Отзывы: