JVC GR-D728EK, Инструкция по эксплуатации

Страница: 15 / 40

EN
15
GETTING STARTED
MasterPage: Start_Right
GETTING
ST
AR
TED
The language on the display can be changed.
(
墌
pg. 24, 27)
1
Open the LCD monitor fully.
2
Set the Power Switch to “REC” or “PLAY”
while pressing down the Lock Button located on
the switch.
●
If set to “REC” , the recording mode should be
set to “
M
”. (
墌
pg. 20)
3
Press MENU .
4
Select “SYSTEM”, press SET or .
5
Select “LANGUAGE”, press SET or .
6
Select the desired language, press SET or .
7
Press MENU .
Press whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off.
(
墌
pg. 26, 28)
Perform steps
1
–
3
in “Language Settings”.
(
墌
pg. 15)
1
Select “DISPLAY”, press SET or .
2
Select “CLOCK ADJ.” press SET or .
3
Select the desired date display format, press
SET or .
●
Repeat this step to input time display format (Select
from “24h” or “12h”), month, date, year, hour and
minutes.
4
Press MENU .
Press whenever you want to return to the
previous menu screen/setting.
1
Set the Power Switch to “REC” while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Perform steps
1
–
3
in “Language Settings”.
(
墌
pg. 15)
●
To adjust the brightness of the viewfinder, pull
out the viewfinder fully and set “PRIORITY” to
“FINDER”. (
墌
pg. 27)
1
Select “DISPLAY”, press SET or .
2
Select “BRIGHT”, press SET or .
3
Select the appropriate brightness,
press SET or .
4
Press MENU .
Press whenever you want to return to the
previous menu screen/setting.
Language Settings
Date/Time Settings
LANGUAGE
ENGLISH
FRANCAIS
NEDERLANDS
ITALIANO
ESPAÑOL
1
2
SET
Select
CLOCK ADJ.
DATE. MONTH. YEAR 24h
2 : 26
6. 9. 2007
1
2
Select
SET
Viewfinder Adjustment
Brightness Adjustment Of The
Display
Dioptre Adjustment Control
Example:
BRIGHT
±
0
1
2
SET
Select