JVC GR-D640E, Инструкция по эксплуатации

Страница: 35 / 56

EN
35
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
AD
V
A
N
C
ED
F
E
A
T
UR
ES
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
DSC
[ ] = Factory-preset
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
modes are available: FINE (
) and
STANDARD ( ) (in order of quality).
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (
墌
pg. 27)
640 x 480 / 1024 x 768 / [1280 x 960]
The Image Size mode can be selected to best
match your needs. (
墌
pg. 27)
NOTE:
The setting can be changed only when the
VIDEO/
MEMORY
Switch is set to “MEMORY”.
[ (TAPE)] : When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to “VIDEO”, still images are recorded only onto
the tape.
/ (TAPE/CARD) : When Snapshot
recording is performed with the VIDEO/
MEMORY Switch set to “VIDEO”, still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels).
[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 35, select “SOUND MODE” or
“NARRATION” from the Menu Screen and set it
to the desired parameter.
The settings below are effective only for video
playback except “BRIGHT”, “16:9” and “REC
MODE”.
The parameters (except “OFF” in ON SCREEN,
SOUND MODE and NARRATION settings) are
the same as in the description on
(
墌
pg. 33, 34).
Allows you to set the video recording mode (SP
or LP) depending on your preference.
* SP indicator does not appear on the screen.
[STEREO ] : Sound is output on both “L” and
“R” channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
[OFF] : Original sound is output on both “L” and
“R” channels in stereo.
ON : Dubbed sound is output on both “L” and “R”
channels in stereo.
MIX : Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
墌
pg. 17, “Brightness Adjustment Of The
Display”.
[OFF] : The date/time does not appear.
ON : The date/time is always displayed.
When set to “OFF”, the camcorder’s display
disappears.
墌
pg. 22 “Time Code”
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
[4:3TV]: For TV with an aspect ratio of 4:3
16:9TV: For TV with an aspect ratio of 16:9
QUALITY
IMAGE SIZE
REC SELECT
Playback Menus
REC MODE [SP*] / LP
SOUND MODE
NARRATION
BRIGHT
DATE/TIME
ON SCREEN OFF / [LCD] / LCD/TV
TIME CODE [OFF] / ON
16:9
SP
LP
TV
GR-D650E-640E.book Page 35 Tuesday, May 30, 2006 11:31 AM