GETTING STARTED
16
EN
MasterPage: Left
Power-Linked Operation
When the Power Switch is set to “REC”, you can
also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
The language on the display can be changed.
(
1
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Set the recording mode to “
M
4
Press MENU. The Menu Screen appears.
5
Press
3
,
4
,
2
or
1
to
select “DISPLAY”, and
press SET. The DISPLAY
Menu appears.
6
Press
3
,
4
,
2
or
1
to
select “LANGUAGE”, and
press SET.
7
Press
3
or
4
to select
the desired language, and
press SET or
2
.
●
Press
1
whenever you
want to return to the
previous menu screen.
8
Press MENU. The
Menu Screen closes.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (
1
Perform steps
on the left column.
2
Press
3
,
4
,
2
or
1
to select “CLOCK ADJ.”,
and press SET. The date display format is
highlighted.
3
Press
3
or
4
to select the desired date
display format, then press SET or
2
. Select from
“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
or “YEAR.MONTH.DATE”.
4
Press
3
or
4
to select the time display
format, then press SET or
2
. Select from “24h”
or “12h”.
5
Set the year, month, date, hour and minute.
Press
3
or
4
to select the value, then press SET
or
2
. Repeat this step until you have input all the
settings.
NOTE:
Press
1
to return to the previous setting.
6
Press
MENU
.The Menu
screen closes.
Language Settings
LANGUAGE
0001
DEMO
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
LANGUAGE
Date/Time Settings
M NTH
DEC
7
0
0 : 0 5
6 2 006
AM
1 2h
.
.
DATE YEAR
.
.
O
CLOCK ADJ .
GR-D375UC.book Page 16 Thursday, January 26, 2006 9:09 PM
