EN
27
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADV
A
N
C
ED
F
E
A
T
UR
ES
SYSTEM
The “
s
SYSTEM” functions which are set when
the Power Switch is set to “
M
” are also applied
when the Power Switch is set to “PLAY”.
[ ]
= Factory-preset
OFF
: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP
: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
墌
pg. 31)
[MELODY]
: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect. (
墌
pg. 31)
OFF
: Disables the remote control operations.
[ON]
: Enables the remote control operations.
OFF
: Automatic demonstration will not take
place.
[ON]
: Demonstrates certain functions such as
Program AE with special effects, etc., and can
be used to confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “
A
” or “
M
”.
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
●
If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.
[LCD]
: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER
: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
EXECUTE
: Resets all settings to the factory-
preset.
[RETURN]
: Does not reset all settings to the
factory-preset.
BEEP
REMOTE
DEMO MODE
PRIORITY
CAM RESET
GR-D252AA_AG_AH_AS.book Page 27 Tuesday, July 19, 2005 5:55 PM