D.S.C. RECORDING (GR-D93/D73 only)
DIG
IT
A
L STILL C
A
MERA
(D
.S.C
.)
RECOR
D
ING
& P
L
A
YBACK
(G
R-D
9
3/D73 only
)
EN
19
MasterPage: DSC_Right
Still images can be dubbed from a tape to a memory
card.
1
Load a cassette. (
墌
pg. 10)
2
Load a memory card. (
墌
pg. 10)
3
Set the
VIDEO/MEMORY
Switch to “VIDEO”.
4
Set the Power Switch to “PLAY” while pressing down
the Lock Button located on the switch.
5
Set “
COPY” to “ON”. (
墌
pg. 25, 28)
6
Press
4
/
9
to start playback.
7
At the point you want to dub, press
4
/
9
again to
engage Still Playback.
8
To dub the image, press
SNAPSHOT
.
●
The “
” indication appears during dubbing.
●
The selected image is stored in the memory card.
NOTES:
●
If
SNAPSHOT
is pressed in step
8
when a memory card is
not loaded, the message “COPYING FAILED” is displayed.
●
If an image recorded on the tape using “WIDE MODE”
(
墌
pg. 26) is dubbed to a memory card, the WIDE mode
identifying signal is not dubbed with it.
●
To use Playback Special effects with a video image you
wish to dub, perform up to step
8
using the remote control
(provided). (
墌
pg. 16)
●
Images are dubbed in 640 x 480 pixels.
Dubbing Still Images Recorded On A Tape
To A Memory Card
GR-D73US.book Page 19 Thursday, November 20, 2003 10:50 AM
