background image

32

 EN

VIDEO   RECORDING

  Advanced Features (cont.)

AUTO

MANU

AUTO

MANU

OFF

ON

FAST

SLOW

Adjusts focus automatically.

Allows you to adjust focus manually (

Z

 pg. 34, 35).

Adjusts exposure automatically.

Allows you to adjust exposure manually (

Z

 pg. 36).

Allows you to set the current date and time (

Z

 pg. 13).

Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance
more than 1m (3.3 ft.) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to “ON”, you can
shoot a subject as large as possible at a distance of approx. 60
cm (2 ft.).
•Depending on the zoom position, the lens may go out of focus.

Allows you to set the tape length depending on the tape used (

Z

 pg. 16).

This camcorder’s Automatic Color Temperature system senses
the color temperature of the ambient lighting for automatic
white balance adjustment. However, precise color adjustment is
not possible under the following conditions:
•When an object is in various shades of the same color.
•When a predominantly red or brown object is being shot

outdoors.

In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (

Z

 pg. 37).

Allows you to set the zooming speed (

Z

 pg. 20).

Menu Screen Explanations

FOCUS

EXPOSURE

DATE/TIME

TELE MACRO

TAPE LENGTH

M.W.B.

ZOOM SPEED

AUTO

: FINE

: CLOUD

: HALOGEN

MWB

Содержание GR-AX999UM

























































































Отзывы: