3 – EN
1
2
3
Repeat step
2
if necessary.
• To return to the previous menu, press
BACK
.
• To exit from the menu, press
DISP
or
MENU
.
Category
Menu item
Selectable setting, [
Initial:
Underlined
]
DEMO
DEMO
•
DEMO ON
•
DEMO OFF
: Display demonstration will be activated automatically if
no operation is done for about 20 seconds.
: Cancels.
CLOCK
CLOCK SET
[
1:00
]
: Adjust the hour, then the minute.
PRO EQ
BASS
—
: For settings, see “Storing your own sound mode.”
MIDDLE
TREBLE
DISPLAY
DIMMER
•
DIMMER ON
•
DIMMER OFF
: Dims the display and button illumination.
: Cancels.
SCROLL
*
1
•
SCROLL ONCE
•
SCROLL AUTO
•
SCROLL OFF
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing
DISP
for more than one second can scroll the display regardless of the
setting.
TAG
DISPLAY
•
TAG ON
•
TAG OFF
: Shows the Tag information while playing MP3/WMA
tracks.
: Cancels.
TUNER
SSM
*
2
•
SSM 01 – 06
•
SSM 07 – 12
•
SSM 13 – 18
: For settings, see “Automatic presetting (FM)—SSM
(Strong-station Sequential Memory)” on page 2.
AREA
•
AREA US
•
AREA EU
•
AREA SA
: When using in North/Central/South America. AM/FM
intervals are set to 10 kHz/200 kHz.
: When using in any other areas. AM/FM intervals are set
to 9 kHz/50 kHz (100 kHz during auto search).
: When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
MONO
*
2
•
MONO ON
•
MONO OFF
: Activate monaural mode to improve FM reception, but
stereo effect will be lost.
: Restore the stereo effect.
IF BAND
•
AUTO
•
WIDE
: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may be
lost.)
: Subject to interference noises from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
Category
Menu item
Selectable setting, [
Initial:
Underlined
]
AUDIO
FADER
*
3
R06 – F06
[
00
]
: Adjust the front and rear speaker output balance.
BALANCE
*
4
L06 – R06
[
00
]
: Adjust the left and right speaker output balance.
LOUD
•
LOUD ON
•
LOUD OFF
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
VOL ADJUST VOL ADJ –05 —
VOL ADJ +05
[
VOL ADJ 00
]
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease when
you change the source.
• Before making an adjustment, select the source you
want to adjust.
• “VOL ADJ FIX” appears on the display if “FM” is selected
as the source.
L/O MODE
•
SUB.W
•
REAR
: Select if the REAR LINE OUT terminals are used for
connecting a subwoofer (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for
connecting the speakers (through an external amplifier).
SUB.W
FREQ
*
5
•
LOW
•
MID
•
HIGH
: Frequencies lower than 72 Hz are sent to the subwoofer.
: Frequencies lower than 111 Hz are sent to the subwoofer.
: Frequencies lower than 157 Hz are sent to the subwoofer.
SUB.W
LEVEL
*
5
SUB.W 00 —
SUB.W 08
[
SUB.W 04
]
: Adjust the subwoofer output level.
BEEP
•
BEEP ON
•
BEEP OFF
: Activates the keypress tone.
: Deactivates the keypress tone.
AMP GAIN
*
6
•
LOW POWER
•
HIGH POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speakers.)
: VOLUME 00 – VOLUME 50
SRC
SELECT
AM
*
7
•
AM ON
•
AM OFF
: Enable “AM” in source selection.
: Disable “AM” in source selection.
AUX IN
*
8
•
AUX ON
•
AUX OFF
: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.
*
1
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
2
Displayed only when the source is “FM.”
*
3
If you are using a two-speaker system, set the fader level to “00.”
*
4
This adjustment will not affect the subwoofer output.
*
5
Displayed only when <L/O MODE> is set to <SUB.W>.
*
6
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
is set higher than “VOLUME 30.”
*
7
Displayed only when any source other than “AM” is selected.
*
8
Displayed only when any source other than “AUX IN” is selected.
Menu operations
Selecting a preset sound mode
You can select a preset sound mode suitable for the music genre.
FLAT
=
NATURAL
=
DYNAMIC
=
VOCAL BOOST
=
BASS BOOST
=
USER
=
(back to the beginning)
While listening, you can adjust the tone level of the selected sound
mode.
1
2
Adjust the level (–06 to +06) of the selected tone (BASS /
MIDDLE / TREBLE).
The sound mode is automatically stored and changed to “USER.”
Storing your own sound mode
You can store your own adjustments in memory.
1
2
]
<PRO EQ>
]
<BASS> / <MIDDLE> / <TREBLE>
3
Adjust the sound elements of the selected tone ( see table on
the right).
4
Repeat steps
2
and
3
to adjust other tones.
The adjustments made will be stored automatically in “USER.”
The current sound mode changes to “USER” automatically.
Tone
Sound element
Frequency
Level
Q
BASS
60 Hz, 80 Hz, 100 Hz,
200 Hz
–06 to +06
Q1.0, Q1.25,
Q1.5, Q2.0
MIDDLE
0.5 kHz, 1.0 kHz,
1.5 kHz, 2.5 kHz
–06 to +06
Q0.75, Q1.0,
Q1.25
TREBLE
10.0 kHz, 12.5 kHz,
15.0 kHz, 17.5 kHz
–06 to +06
Q FIX
[Hold]
[Hold]
[Hold]
EN_KD-S27[J]_f.indd 3
EN_KD-S27[J]_f.indd 3
7/1/10 3:43:29 PM
7/1/10 3:43:29 PM
