JVC GET0241-001B Скачать руководство пользователя страница 23

Страница: 23 / 26

ENGLISH

Remedies

Insert discs into the magazine.

Insert discs correctly.

Insert playable discs.

Insert a disc that contains MP3
files.

Insert the magazine.

Connect this unit and the
CD changer correctly and press
the reset button of the CD
changer.

Press the reset button of the
CD changer.

While holding SEL (select),
press

(standby/on/

attenuator) for more than
2 seconds to reset the unit.
(Your preset adjustments will
also be erased.) (See page 2.)

Change the disc.

Add the extension code
<.mp3> to their file names.

Change the disc.
(Record MP3 files using a
compliant application.)

Skip to another file or change
the disc. (Do not add the
extension code <.mp3> to
non-MP3 files.)

It is not recommended to use
too many hierarchies and
folders, and to record any other
types of audio files together
with MP3 files.

Insert a disc that contains files
encoded in an appropriate
format.

CD Changer (General)

Causes

No disc is in the magazine.

Discs are inserted upside down.

Discs are unplayable.

The current disc does not
contain any MP3 files.

No magazine is loaded in the
CD changer.

This unit is not connected to the
CD changer correctly.

The built-in microcomputer may
function incorrectly due to noise,
etc.

No MP3 files are recorded on
the disc.

MP3 files do not have the
extension code <.mp3> in their
file names.

MP3 files are not recorded in
the format compliant with ISO
9660 Level 1 or Level 2.

The file played back is not an
MP3 file (although it has the
extension code <.mp3>).

Readout time varies due to the
complexity of the folder/file
configuration.

Playback order is determined
when the files are recorded.

Symptoms

• “NO CD” appears on the

display.

• “NO MAG” appears on

the display.

• “RESET 8” appears on

the display.

• “RESET 1” – “RESET 7”

appears on the display.

• The CD changer does

not work at all.

• Disc cannot be played

back.

• Noise is generated.

• A longer readout time is

required.

• Files cannot be played

back as you have
intended them to play.

CD Chang

er (MP3 discs)

EN22-25KS-FX555[UN]f.p65

5/12/04, 3:45 PM

Содержание GET0241-001B



























Результаты поиска

Содержание GET0241-001B

Отзывы:

Похожие инструкции для GET0241-001B

Бренды по названию

Популярные бренды

JVC GET0241-001B, Инструкция по эксплуатации

Результаты поиска

Содержание GET0241-001B

Отзывы:

Похожие инструкции для GET0241-001B

Бренды по названию

Популярные бренды