21
ENGLISH
Selecting the external
component to use
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
To use the external component as the playback
source through this receiver, you need to select
which device — CD changer or external component
— to use. When shipped from the factory, CD
changer is selected as the external component.
LINE IN: To use the external component other than
CD changer
CHANGER: To use the CD changer
1
Change the source to FM, AM or TAPE.
2
Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”,
“SCM LINK”, “LEVEL”,
“B.SKIP” or “EXT IN”
appears on the display.
3
Select “LINE IN” if not shown on the
display.
4
Select the desired mode — “LINE IN”
or “CHANGER”.
5
Finish the setting
Note:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
connection Manual (separate volume).
EN20-24KS-FX611[U]-9
11/1/01, 3:19 PM
21
