12
■
INPUT : Select an input source for main screen (VIDEO1, VIDEO2, S-VIDEO, RGB PC, HDMI)
■
LANGUAGE : Set to different language mode (ENGLISH, ITALIAN, FRENCH, SPANISH, GERMAN)
■
SOUND MUTE : Turn on/off the sound
* While “SOUND MUTE” is "ON", displays each changing the input source
* After turn off(stand-by mode), “SOUND MUTE” turns to “OFF”.
■
KEY LOCK : Locking the button on the
front panel. (Prevent operation)
* Press
▲
&
◀
buttons simultaneously for 5 seconds
and turning “KEY LOCK” to “OFF”.
* After turn off(no AC power supply ), turning “KEY LOCK” to “OFF”.
■
NOISE REDUCTION : Set a noise reduction mode
■
OSD TIME : Set a time duration of OSD menu
(5s – 30s : Default setting is 15s)
■
DEFAULT : Factory default setting.
■
NO SYNC ACTION : Set the monitor to turn into Stand-by mode when no sync status continues for about 15 minutes
* NO SYNC ACTION item is for the VIDEO1 / VIDEO2 / S-VIDEO / HDMI input only
*Use "POWER SAVING" mode in RGB PC input
*When turn on, displays “No sync action worked” in a few seconds by this setting.
■
NO OPERATION : Set the monitor to turn into Stand-by mode when no operation status continues for about 4 hours.
*In case of continue to use over 4 hour, change to “OFF”. (Default setting is “ON”.)
*When turn on, a few seconds displays “No operation action worked” in this setting.
■
HDMI AUDIO : Set the output of HDMI AUDIO
DIGITAL – Output the digital audio signal on HDMI.
ANALOG – Output the input signal of AUDIO(PC) jack.
AUTO – Automatically detects the HDMI digital audio. When no detect, output the input signal of AUDIO(PC) jack.
*
When AUDIO(PC) jack
use in RGB PC, set to "DIGITAL".
SETUP
CONTROLS AND FUNCTIONS
(cont.)
1. Press the MENU button to access menu.
2. Use the
▲
/
▼
button to highlight a selection.
3. Press the
▶
button to choose an item.
4. Use the
▲
/
▼
button to highlight a selection.
5. Use the
◀
/
▶
button to adjust the setting on
a selected item.
