22
EN
Manual Channel Set
Store channels that were not stored during Auto Set Up (
Z
pg. 4)
or Auto Channel Set (
Z
pg. 21).
SELECT POSITION
6
Press NUMBER keys to
input an open channel
position which you want
to store the detected
station (for a one-digit
number, enter "0" first).
Then press OK.
●
To continue channel
search, press PUSH JOG
%fi
to select "CON-
TINUE", then press OK.
Repeat steps 4 – 6 as
necessary.
●
To set channels for other
bands, press PUSH JOG
%fi
to select "BAND SELECT", then press OK to go
back to the Band Select screen. Repeat steps 3 – 6.
RETURN TO NORMAL
SCREEN
7
Press MENU.
ACCESS TUNER SET
SCREEN
1
Perform steps 1 – 3 of "Auto Channel Set" on page 21.
ACCESS MANUAL CH SET
SCREEN
2
Press PUSH JOG
%fi
to place the pointer next to
"MANUAL CH SET", then press OK.
SELECT BAND
3
Press PUSH JOG
%fi
to place the pointer next to the
band of your choice, then press OK to initiate Manual
Channel Set.
SET DESIRED STATION
4
The screen to the right
appears when a station is
detected. To store the
detected station, place the
pointer next to "STORE" by
pressing PUSH JOG
%fi
,
then press OK. If you do
not want to store the
station, press PUSH JOG
%fi
to place the pointer next
to "CONTINUE", then press OK. Channel search will
resume.
●
The blueback screen and the TV picture currently
being broadcast appear alternately for 8 seconds
each.
PERFORM TUNING
5
For fine tuning adjustment,
press PUSH JOG
%fi
until
the picture becomes
clearer, then press OK.
●
The CH section will
blink.
BAND SELECT
VHF L
VHF H
UHF
[
5
/
∞
]
=
[MENU] : EXIT
MANUAL CH SET
PLEASE WAIT
VHF L 00MHZ
[MENU] : EXIT
TUNER SET (cont.)
STORE
CONTINUE
[
5
/
∞
]
=
[MENU] : EXIT
MANUAL CH SET
CH
FRQ
– –
350
[
5
/
∞
] : FINE TUNING
: SELECT CH
[MENU] : EXIT
MANUAL CH SET
CH
FRQ
– –
350
[0–9] : INPUT CH
[MENU] : EXIT
CONTINUE
BAND SELECT
[
5
/
∞
]
=
[MENU] : EXIT
