FS-SD58V/FS-SD78V/FS-SD98V
1-13
Prior to performing the following procedure, remove
the VCD CB assembly.
Turn over the CD mechanism assembly and remove
the screw X which retains the wire extending from
the CD mechanism board.
Remove the seven screws U attaching the CD
mechanism cover and the CD mechanism board.
Disconnect the wire from connector CN703 and
CN706 on the CD mechanism board respectively.
Turn back the CD mechanism assembly and detach
the CD mechanism cover while pulling the CD
mechanism assembly outward to release the two
joint tabs marked c.
Disconnect the card wire from the connector of the
CD mechanism assembly inside the CD mechanism
cover. Disconnect the wire from CN605 on the CD
mechanism board. Pull the CD mechanism assembly
out of the three shaft of the CD mechanism cover.
1.
2.
3.
4.
5.
Removing the CD mechanism board /
mechanism assembly (See Fig.34 to 38)
Remove the CD mechanism board from the CD
mechanism cover.
6.
When reassembling, confirm that the
cushion of the CD mechanism assembly
is reattached to the three shafts.
ATTENTION:
Fig.34
Fig.35
Fig.36
Fig.37
Fig.38
CD mechanism assembly
CD mechanism cover
Joint c
CD mechanism assembly
Joint c
Tab
CD mechanism cover
CD mechanism assembly
CD mechanism
cover
CD mechanism board
CN605
Cushion
Cushion
CD mechanism cover
CD mechanism board
Shafts
CD mechanism cover
CD mechanism board
CN706
U
U
U
U
X
CN703
Tab
Содержание FS-SD58V
Страница 52: ...A B C 1 2 3 4 5 VCD board reverse side VCD board foward side 2 9 FS SD58V FS SD78V FS SD98V ...
Страница 53: ... M E M O 2 10 FS SD58V FS SD78V FS SD98V ...
Страница 55: ... M E M O 3 2 ...