1-14 (No.MB229)
3.1.11 Removing the heat sink and heat sink B
(See Figs.18 and 19)
• Prior to performing the following procedure, remove the side
panels L/R, front panel assembly, top panel, rear panel and
fan.
(1) From the top side of the main body, remove the two screws
M
attaching the heat sink on the power amplifier board.
(See Fig.18.)
(2) From the side of the power amplifier board, remove the two
screws
N
attaching the heat sink. (See Fig.18.)
(3) From the front side of the main body, remove the three
screws
P
attaching the heat sink B. (See Fig.19.)
Reference:
Remove the tuner and video board as required.(See Figs.10,
11 and 13.)
Fig.18
Fig.19
Heat sink
Power amplifier board
N
M
M
P
Heat sink B
