14
English
2. Press the
¢
or
4
button to select the music source you
want to listen to.
The display changes as shown below.
■
5. Setting the volume level
1. Press the TIMER/SNOOZE button on the Unit.
The current volume setting blinks on the display.
2. Press the
¢
or
4
button to select the volume level
--
:
The current volume level wil be used.
1 to 5:
Low (1) to high (5) level. When the timer is turned
on, the Volume will be automatically turned to the
set position.
■
6. Press the TIMER/SNOOZE button on the
Unit.
The timer setting is completed and the display returns to the dis-
play before you set the timer (The Timer indicator remains lit).
■
7. Before turning off the Unit, prepare the
music source selected in step 4.
Tuner: Tune to the desired station.
CD:
Insert a CD.
■
8. Press the POWER button to turn off the
System.
To cancel the timer,
press the TIMER/SNOOZE button. The
Timer indicator goes out on the display.
To re-activate the cancelled timer,
press the TIMER/
SNOOZE button to light the Timer indicator. Then, press the TIM-
ER/SNOOZE button repeatedly, until the display returns to the
original display before setting the timer (Be sure that the Timer in-
dicator is lit.).
To confirm the timer settings,
cancel the timer once by press-
ing the TIMER/SNOOZE button. Then, press the TIMER/
SNOOZE button repeatedly, and you can see the current timer set-
tings (ON time, OFF time, source, and volume).
To change the timer setting,
repeat the setting procedure from
the beginning.
•
When the timer turns on, the Timer indicator starts blinking.
•
When the timer turns on, it is possible to fade in the sound from
volume level 0 (zero) to the preset volume.
CAUTION: If the System is unplugged, or a power
failure occurs, the timer setting will be lost after
about 24 hours. You will need to reset the clock
first, then the timer.
5-Minute Snoozing —————————
When the timer turns on the music source you can, if you wish, ac-
tivate the 5-minute snoozing function to temporarily stop playback.
Press the TIMER/SNOOZE button on the Unit.
The “SNZ” indicator lights up on the display and the power is
turned off for five minutes for snoozing.
Use the Sleep Timer to turn the System off after a certain number of
minutes when it is playing. By setting the Sleep Timer, you can fall
asleep to music and know that your System will turn off by itself
rather than play all night.
■
You can only set the Sleep Timer when the System is on and a
source is playing.
■
1. Play a CD or tune in to the desired station.
■
2. Press the SLEEP button on the Unit or the
Remote Control.
The “SLEEP” indicator lights up.
■
3. Set the length of time you want the source
to play before shutting off.
•
Each time you press the SLEEP button, it changes the
number of minutes shown on the display in this sequence:
=
30
=
60
=
90
=
120
=
Cancelled
=
(back to the begin-
ning)
After setting the number of minutes for the Sleep Timer, the display
will stop blinking after 5 seconds and return to the display as before
setting the Sleep Timer.
The System is now set to turn off after the number of minutes you
set.
To Confirm the Sleep Time
When the SLEEP button is pressed, the remaining sleep time is dis-
played. Wait for 5 seconds until the display returns to the original
display.
To Cancel the SLEEP Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the
display.
Turning off the System also cancels the SLEEP Timer.
■
If you are setting the Daily Timer, the System will be turned on
at the set time to wake you up.
VOL 1
VOL 5
VOLUME
VOL 5: Approx. 11 o’clock position
VOL 1: Approx. 8 o’clock position
Setting the SLEEP Timer
FS6000-5000(J)-e.fm Page 14 Tuesday, June 16, 1998 9:32 AM
