background image

33

ENGLISH

2

  Select the file type—either “Picture” 

or “Movie.”

The Folder List appears.

3

  Select a folder.

•  You can move to the other lists by 

pressing 

4

/

¢

 (

/

)

.

The File List appears.

4

  Select a file.

•  You can move to the other lists by 

pressing 

4

/

¢

 (

/

)

.

IMPORTANT:

•  Refer also to Image Converter PDF files 

included in the “Manual” folder on the 
supplied CD-ROM.

•  Still images (pictures) and animations 

(movie) should have the following 
extension code in their file names:

  – 

jpl:

 for large size still images

  – 

jpm:

 for small size still images

   – 

jpa:

 for large size animations  

  – 

jpb:

 for small size animations

  – 

jpw:

 for ImageLink (see pages 37 and 47)

•  Before you download or delete the files, 

observe the following:

  –  Do not download a file while driving.
  –  Do not turn off the ignition key of the 

car while downloading or deleting a 
file.*

  –  Do not detach the control panel while 

downloading or deleting a file.*

*

 If you do so, the file download or deletion 

will not be done correctly.

Downloading the fi les

• 

Picture:

 Graphic screen

  To download/delete still images (16 still 

images each for large size and for small size) 
which will be shown while playing a source.

• 

Movie:

 Graphic screen

  To download/delete animations (60 frames 

each for large size and for small size) which 
will be shown while playing a source.

  Downloading pictures or animations

•  It takes a long time to download an animation. 

For details, see page 48.

•  To activate the downloaded files, see page 36.

1

  Follow steps 

~

 to 

@

 on page 32.

• In step 

!

, select the picture size.

•  Then in step 

@

, select “Download.”

To be continued....

EN32-36_KD-SHX855[U]f.indd   33

EN32-36_KD-SHX855[U]f.indd   33

05.4.8   8:59:40 PM

05.4.8   8:59:40 PM

Содержание EXAD KD-SHX855



























































Отзывы: