Charging the Battery Pack
.
Charging finished:
Goes out
Charging in progress:
Blinks
Charging Lamp
Close the battery cover.
Connect the DC connector and
plug in the power.
Open the battery cover.
To detach the battery pack, perform
the above steps in reverse order.
Attach the battery pack.
(Base)
Align the terminal of the
battery pack with this unit.
The battery pack is not charged at the
time of purchase.
If it is difficult to detach the battery
pack, open the SD card cover. (p.6)
To attach any other battery packs
besides the supplied one, open the SD
card cover before attaching. (p.6 )
CAUTION
Be sure to use JVC battery packs.
0
If you use any other battery packs besides JVC battery packs, safety and
performance cannot be guaranteed.
0
If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any
battery manufactured other than JVC is attempted for battery charge, charging
stops. In these cases, the CHARGE lamp blinks quickly for notification.
0
You can record or play back videos while the AC adapter is connected. (Battery
charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance
of the battery may drop if it is left attached to the unit.
0
Charging time: Approx. 3 h 30 m (using supplied battery pack)
0
The charging time is when the unit is used at 25°C. If the battery pack is charged
outside the room temperature range of 10°C to 35°C, charging may take a longer time
or it may not start. CHARGE lamp blinks 2 times in a slow cycle for notification if the
battery charge does not start. Also, please note that the recordable and playable time
may be shortened under some usage conditions, such as at low temperature.
5
