JVC Everio GZ-MG40 Скачать руководство пользователя страница 52

Страница: 52 / 64

MasterPage: Heading0_Left

REFERENCES

Power

No power is supplied.

●

The power is not connected properly.

Connect the AC adapter securely. (

墌

pg. 14)

●

The battery pack is not attached firmly.

Detach the battery pack once again and re-attach
it firmly. (

墌

pg. 14)

●

The battery is dead.

Replace the dead battery with a fully charged
one. (

墌

pg. 14)

No display appears.

●

When using the AC adapter, the camera enters
the sleep mode, the access lamp lights, and the
LCD monitor turns off.

To cancel the sleep mode, perform any operation
such as zooming.

The power was turned off accidentally.

●

The drop detection function operated. (

墌

pg. 21)

Set the power switch to

OFF

, and turn the power

on again. To turn off the drop detection function,
set [DROP DETECTION] to [OFF]. (

墌

pg. 49)

Recording

Recording cannot be performed.

●

[MEMORY CARD IS FULL] appears.

Replace with new recording medium or delete
unnecessary files. (

墌

pg. 20, 39)

●

Recording medium is not selected properly.

Select the recording medium. (

墌

pg. 21, 48, 49)

When shooting a subject illuminated by
bright light, vertical lines appear.

●

This is not a malfunction.

When the screen is under direct sunlight
during shooting, the screen becomes red or
black for an instant.

●

This is not a malfunction.

During recording, the date/time does not
appear.

●

[DATE/TIME] is set to [OFF].

Set [DATE/TIME] to [ON]. (

墌

pg. 49)

The LCD monitor indications blink.

●

Certain modes of program AE, effect, DIS and
other functions that cannot be used together are
selected at the same time.

Digital zoom does not work.

●

[ZOOM] is set to [15X]* (optical zoom).

Set [ZOOM] to [60X] or [700X]*. (

墌

pg. 50)

●

Digital zoom is not available in the still image
recording mode.

* For GZ-MG30U/GZ-MG20U optical zoom can go

up to 25x, and [ZOOM] can be set to [100X] or
[800X].

Troubleshooting

The camera is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from
functioning properly.

To solve the problem, follow the Instructions
below at first.

If the problem is not solved, reset the
camera. (Refer to “To reset the camera”
below.)

If the problem still exists, please consult your
nearest JVC dealer.

To reset the camera

Press

RESET

using a piece of wire or other

such pointed instrument. The power is
turned off once and turned on again
automatically.

If nothing happens, set the power switch to

OFF

and remove the power supply (battery

pack or AC adapter) from the camera, then
put it back again.

Execute [PRESET] from the menu. The
camera returns to it’s factory-preset.
(

墌

pg. 48)

RESET

M5E3US.book Page 52 Wednesday, September 7, 2005 4:38 PM

Содержание Everio GZ-MG40

































































Результаты поиска

Содержание Everio GZ-MG40

Отзывы:

Похожие инструкции для Everio GZ-MG40

Бренды по названию

Популярные бренды

JVC Everio GZ-MG40, Инструкция по эксплуатации

Результаты поиска

Содержание Everio GZ-MG40

Отзывы:

Похожие инструкции для Everio GZ-MG40

Бренды по названию

Популярные бренды