REFERENCES
EN
33
RE
FE
RE
N
C
ES
MasterPage: Reference_Right
If the problem still exists after following the instructions
below, please consult your nearest JVC dealer.
Power
No power is supplied.
●
The power is not connected properly.
H
Connect the AC Adapter securely.
(
墌
pg. 14)
●
The battery pack is not attached firmly.
H
Detach the battery pack once again and re-attach it firmly.
(
墌
pg. 14)
●
The battery is dead.
H
Replace the dead battery with a fully charged one.
(
墌
pg. 14)
Recording
Recording cannot be performed.
●
[MEMORY CARD IS FULL] appears.
H
Replace with new recording medium or delete unnecessary
files. (
墌
pg. 16, 29)
●
Recording medium is not selected properly.
H
Select the recording medium. (
墌
pg. 17)
●
The battery/CF card cover is open.
H
Close the cover and set the power switch to
OFF
, then to
.
When shooting a subject illuminated by bright light,
vertical lines appear.
●
This is not a malfunction.
When the screen is under direct sunlight during
shooting, the screen becomes red or black for an
instant.
●
This is not a malfunction.
During recording, the date/time does not appear.
●
[DATE/TIME] is set to [OFF].
H
Set [DATE/TIME] to [ON]. (
墌
pg. 18)
The LCD monitor indications blink.
●
Certain modes of wipe/fader, program AE, effect, DIS and
other functions that cannot be used together are selected at
the same time.
Digital zoom does not work.
●
[ZOOM] is set to [10X] (optical zoom).
H
Set [ZOOM] to [40X] or [200X]. (
墌
pg. 28)
Playback
Playback cannot be performed.
●
Recording medium is not selected properly.
H
Select the recording medium. (
墌
pg. 17)
●
The battery/CF card cover is open.
H
Close the cover and set the power switch to
OFF
, then to
.
●
Playback starts, but there is no picture on TV.
H
Set the TV's input mode or channel appropriate for video
playback.
Advanced features
The focus does not adjust automatically.
●
Focus is set to the manual mode.
H
Set focus to the automatic mode. (
墌
pg. 31)
●
The lens is dirty or covered with condensation.
H
Clean the lens and check the focus again. (
墌
pg. 32)
The color of the image looks strange.
●
The light source or the subject does not include white. Or
there are various different light sources behind the subject.
H
Try manual white balance adjustment. (Refer to the
advanced operation manual in CD-ROM.
墌
pg. 32)
Troubleshooting
The camera is a microcomputer-controlled device.
External noise and interference (from a TV, a radio, etc.)
might prevent it from functioning properly. In such cases,
first disconnect its power supply unit (battery pack, AC
adapter, etc.) and wait a few minutes; and then re-
connect it and proceed as usual from the beginning.
GZ-MC200US_05Menu.fm Page 33 Tuesday, September 14, 2004 10:01 AM
