(No.MB368)1-13
3.1.4 Removing the DVD changer mechanism assembly
(See Figs.8 to 10)
• Remove the metal cover.
(1) From the left side of the main body, disconnect the card
wires from the connectors (
CN800
,
CN810
) on the main
board. (See Fig.8.)
[For DX-T9, DX-T7]
(2) From the left side of the main body, disconnect the card
wires from the connector
CN800
on the main board. (See
Fig.8.)
[For DX-T5]
(3) From the top side of the main body, remove the two screws
F
attaching the DVD changer mechanism assembly on the
mecha chassis. (See Fig.9.)
(4) Take out the DVD changer mechanism assembly from the
main body and disconnect the card wire from the connector
CN930
on the video board. (See Fig.9.)
Reference:
When the resolution of the DVD changer mechanism assem-
bly is done sequentially, release the claws
b
of the tray fitting
and remove the five tray fitting from the DVD changer mecha-
nism assembly. (See Fig.10.)
Fig.8
Fig.9
Fig.10
CN800 CN810
Main board
DVD changer mechanism assembly
DVD changer mechanism assembly
CN930
Video board
F
F
Tray fitting
b
b
DVD changer mechanism assembly
Содержание DX-T5
