46
General
Model name
DT-V17G15
Type
MULTI FORMAT LCD MONITOR
Screen size
Type 17 wide format
Aspect ratio
16:9
Compliant video signal format
☞
“Available signals” on page 47
Format
3G SDI
DUAL LINK HD SDI
HD SDI
SD SDI
EMBEDDED AUDIO
:
:
:
:
:
SMPTE424M/SMPTE425M
SMPTE372M
BTA S-004C, SMPTE292M
ITU-R BT.656:
525/625
SMPTE259M: 525
SMPTE299M, SMPTE272M
Audio output
Internal speaker: 1.0 W + 1.0 W
Operation environment
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V
Rated current
0.6 A (AC 120 V)
0.4 A (AC 220 – 240 V)
4.0 A (DC 12 – 17 V)
External dimensions (excluding protruding
parts)
with the stand
without the stand
Width:
430 mm
Width:
430 mm
Height:
349.8 mm (High)
314.5 mm (Low)
Height:
309 mm
Depth:
199 mm
Depth:
102 mm
Mass
7.1 k
g
(with the stand) 5.4 k
g
(without the stand)
Accessories
AC power cord × 2, Power cord holder × 1, Screw × 2 (for power cord holder), CD-ROM × 1
LCD panel
Type
17˝ wide, active matrix TFT
Effective screen size
Width: 382 mm Height: 215 mm Diagonal: 438 mm
Number of pixels displayed
1920 × 1080
Number of colors displayed
1073 million
Contrast ratio (TYP.)
800:1
Input/output terminals
Video
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP): DVI-D connector x 1 (compatible with DDC2B)
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO/3G SDI/DUAL LINK signals):
Auto detection, 2 line, BNC connector x 2
* Use both IN 1 and IN 2 terminals when selecting DUAL LINK SDI .
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI (SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO/3G SDI signals):
1 line switched out, BNC connector x 1
VIDEO
Input/output of composite signal:
1 line, BNC connector x 2,
1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
COMPO. (Y, P
B
/B-Y, P
R
/R-Y)
Input/output of analog component signal:
1 line, BNC connector x 6
Y: 1 V (p-p), 75 Ω
P
B
/B-Y, P
R
/R-Y: 0.7 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
Audio
AUDIO (IN)
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance
AUDIO (MONITOR OUT)
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External control
REMOTE (MAKE/TRIGGER)
☞
“Using the MAKE/TRIGGER system” on page 40
REMOTE (RS-485)
☞
“Using the serial communication” on page 42
REMOTE (RS-232C)
Specifications (cont.)
DTV17G15̲LCT2699.indb 46
DTV17G15̲LCT2699.indb 46
2012/09/11 14:32:10
2012/09/11 14:32:10
