background image

Dear Customer,

This apparatus is in conformance with the valid 
European directives and standards regarding 
electromagnetic compatibility and electrical safety. 

European representative of Victor Company of Japan, 
Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany

Information for Users on Disposal of Old 
Equipment

[European Union]

This symbol indicates that the 
electrical and electronic equipment 
should not be disposed as general 
household waste at its end-of-
life. Instead, the product should 
be handed over to the applicable 
collection point for the recycling of 
electrical and electronic equipment 
for proper treatment, recovery and 
recycling in accordance with your 
national legislation.

By disposing of this product 
correctly, you will help to conserve 
natural resources and will help 
prevent potential negative effects 
on the environment and human 
health which could otherwise 

be caused by inappropriate waste handling of this 
product. For more information about collection point 
and recycling of this product, please contact your 
local municipal office, your household waste disposal 
service or the shop where you purchased the product.

Penalties may be applicable for incorrect disposal of 
this waste, in accordance with national legislation.

(Business users)

If you wish to dispose of this product, please visit our 
web page http://www.jvc.eu/ to obtain information 
about the take-back of the product.

[Other Countries outside the European Union]

If you wish to dispose of this product, please do so in 
accordance with applicable national legislation or other 
rules in your country for the treatment of old electrical 
and electronic equipment.

Attention:

This symbol is 
only valid in the 
European Union.

WARNING:

  TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS 

APPARATUS TO RAIN OR MOISTURE.

WARNING:

  THIS APPARATUS MUST BE CONNECTED TO A MAINS SOCKET OUTLET 

WITH A PROTECTIVE EARTHING CONNECTION.

CAUTION:

  DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. 

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

IMPORTANT SAFETY INSTRUCTIONS

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 

the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of 

time.

14) Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall 

be placed on the apparatus.

16) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
17) When discarding batteries, environmental problems must be considered and the local rules or laws governing 

the disposal of these batteries must be followed strictly.

3

ENGLISH

European Union only

FCC NOTICE
CAUTION:

 Changes or modifications not approved by JVC could void the user’s authority to operate the 

equipment.

NOTE: 

This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct the interference at 
his own expense.

IMPORTANT RECYCLING INFORMATION

This product has a fluorescent lamp that contains mercury. Disposal of these materials 
may be regulated in your community due to environmental considerations. For disposal 
or recycling information, please contact your local authorities or for USA, the Electronic 
Industries Alliance: http://www.eiae.org

U.S.A. only

EMC Supplement

This equipment is in conformity with the provisions 
and protection requirements of the corresponding 
European Directives. This equipment is designed for 
professional video appliances and can be used in the 
following environments:
•  Controlled EMC environment (for example purpose 

built broadcasting or recording studio), and rural 
outdoors environment (far away from railways, 
transmitters, overhead power lines, etc.)

In order to keep the best performance and ensure 
electromagnetic compatibility, we recommend to use 
cables not exceeding the following length:

Cable  

Length

Power cord  

2.0 m

(attached cable (H05VV-F 3 x 0.75 mm

2

))

Video signal cable (coaxial cable) 

2.0 m

Audio signal cable (shielded cable) 

1.5 m

DVI cable (shielded cable) 

2.0 m

RS-232C cable (shielded cable) 

2.0 m

(A straight cable with a D-sub 9-pin connector)

RS-485 cable (twist pair cable) 

2.0 m

(A straight LAN cable)

REMOTE cable (twist pair cable) 

2.0 m

(A straight LAN cable)

The inrush current of this apparatus is 14.80 ampere.

CAUTION

In case where the strong electromagnetic waves or 
magnetism are near the audio cable or the signal 
cable, the sound or the picture will contain noise. In 
such cases, please keep the cable away from the 
sources of the disturbance.

DT-V17G1_EN.indd   3

DT-V17G1_EN.indd   3

09.12.3   7:55:11 PM

09.12.3   7:55:11 PM

Содержание DT-V17G1





























Отзывы: