JVC DR-MV4SUJ, Инструкция по эксплуатации

Страница: 55 / 84

Masterpage:Right+
EN
55
Filename [MV4S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 55Monday, 9 May 2005 09:39
Still Picture/Frame-By-Frame Playback
1
Press
9
to pause during playback.
●
If there is vertical jitter, press CH +/– to correct the picture.
2
Press
9
repeatedly to activate frame-by-frame playback.
●
To resume normal playback, press
4
.
Slow Motion
1
Press
9
to pause during playback.
2
Press and hold
9
for 2 seconds, then release. Press
9
and
release again to return to still picture.
●
The speed changes for each direction by pressing
3
and
5
repeatedly.
●
To resume normal playback, press
4
.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press
CH + or – to eliminate the noises.
High-Speed Search
During playback, press
5
for forward high-speed search, or
3
for reverse high-speed search.
●
Each press of the button increases the search speed for each
direction.
When pressing
5
:
(SP): +5x
{
+7x
(EP): +11x
{
+21x
When pressing
3
:
Once
3
is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of
3
changes the search
speed between –5x and –7x in SP mode, –11x and –21x in EP mode.
(SP):
– 1x
]
– 5x
{
– 7x
(EP): – 1x
]
– 11x
{
– 21x
●
To resume normal playback, press
4
.
Quick Rewind A Little
During playback, press . The unit rewinds the picture a little
(about 7 seconds) and resumes playback.
●
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press 1 to 6 times to skip over unwanted
sections.
●
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
●
To resume normal playback, press
4
.
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press
2
or
6
to activate Index Search. “–1” or “+1” is displayed on
the front display panel and search begins in the corresponding
direction.
●
To access index codes 2 through 9, press
2
or
6
repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
2
twice.
To locate the beginning of D from the current position, press
6
once.
●
When the specified index code is located, playback begins
automatically.
Advanced Playback (VHS)
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Press VHS so that the VHS lamp lights up on the unit.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
●
the picture will be distorted.
●
the noise bars will appear.
●
there may be a loss of color.
●
you cannot hear the sound.
CH +/–
VHS
VHS
Index number
Current position
MV4S_09Advanced Operation.fm Page 55 Monday, May 9, 2005 9:39 AM