2-8 (No.86700)
2.1.5.3
[ 4 ] REEL DISK ASSY(SUP)
[ 5 ] REEL DISK ASSY(TU)
[ 6 ] REEL COVER ASSY
NOTE 4:
Be careful not to attach the REEL DISK wrongly. The Supply
side can be identified by the white color at the center.
NOTE 5a:
Be careful not to attach the REEL DISK wrongly. The Take-up
side can be identified by the black color at the center.
NOTE 5b
The washer is inserted under the REEL DISK.
Be carefull not to lose the washer.
Two washers are inserted under the REEL DISK in some prod-
ucts manufactured earlier, but one washer is inserted in the
products manufactured recently and in the future.
See the parts list, and use the parts written in the parts list.
NOTE 6:
Perform the following steps for mounting.
(1) Align the hole with the pin.
(2) Attach the
[17]
PINCH ROLLER ARM FINAL ASSY by
aligning the positions.
(3) Attach the SLIDE DECK ASSY (POINT[A]) by aligning
the positions.
(4) Check that the parts below them are located in the cor-
rect positions.
(5) Tighten the 2 screws.
(6) Tighten the screw.
(7) Attach the 1 SLIT WASHER parts.
Fig.2-1-16
NOTE 4, 5
SUP
WHITE
BLACK
REEL DISK ASSY
TU
NOTE 6
(4)
(1), (7)
(2),(6)
(5)
(3)
[A]
[ 6 ]
[ 4 ]
[ 5 ]
[ 17 ]
(W4)
(W6)
(W5a)
(W5b)
(S6b)
10
(S6a)
9
(S6a)
8
NOTE 4
NOTE 5a
NOTE 5b
NOTE 6
