
1-2 (No.YD060)
SPECIFICATION
E.& O.E. Design and specifications subject to change without notice.
• Manufactured under licence from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby Laboratories.
• “DTS “ and “DTS DIGITAL OUT “ are trademarks of Digital Theater Systems, Inc.
• VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar
Development Corporation.
• This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Mac-
rovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing users only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
DR-MH50SE
DR-MH50SEF
DR-MH50SEK
GENERAL
Power requirement AC 220 V - 240 V~, 50 Hz/60 Hz
Power consumption Power on : 37 W
Power off : 15.6 W
Temperature Operating : 5
°
C to 35
°
C
Storage : -20
°
C to 60
°
C
Operating position Horizontal only
Dimensions (W
×
H
×
D) 435 mm
×
70 mm
×
345.5 mm
Weight 6.1 kg
Input/Output
Video input Y:0.5-2.0 Vp-p, 75 ohms(pin jack)
Audio input -8 dB, 50 kilohms (pin jack)
Corresponding to mono (left)
Audio output -8 dB, 1 kilohms (pin jack)
21-pin SCART connectors IN/OUT x 1, IN/DECODER x 1
S-video input Y: 0.8 - 1.2 Vp-p, 75 ohms
C: 0.2 - 0.4 Vp-p, 75 ohms
S-video output Y: 1.0 Vp-p, 75 ohms
C: 0.3 Vp-p, 75 ohms
i.Link 4-pin for DV input
Component video output Y: 1.0 Vp-p, 75 ohms
CB/CR, PB/PR: 0.7 Vp-p, 75 ohms
Corresponding to copy protection
SAT Control 3.5 mm
Digital audio output Optical: -18 dBm, 660 nm
Coaxial: 0.7 Vp-p, 75 ohms
Corresponding to Dolby Digital and DTS Digital Surround Bit stream
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording time Maximum 8 hours (with 4.7 GB disc)
(XP) : Approx. 1 hour, (SP) : Approx. 2 hours, (LP) : Approx. 4 hours, (EP) : Approx. 6 hours, (FR) : Approx. 1 hour - 8 hours
Audio recording system Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system MPEG2 (CBR/VBR)
VIDEO/AUDIO (HDD Deck)
Video recording compression system MPEG2 (VBR)
Audio recording system Dolby Digital (2 ch)
Linear PCM (XP mode only)
Recording time Maximum 473 hours(with 250 GB HDD)
(XP): Approx.53 hours, (SP): Approx.109 hours,(LP): Approx.218 hours, (EP): Approx.328 hours, (FR): Approx. 473 hours
TUNER/TIMER
Signal system PAL-type colour signal and CCIR monochrome signal, 625 lines/50 fields
TV channel storage capacity 99 positions (+AUX position)
Tuning system Frequency synthesized tuner
Channel coverage
(SECAM L)
Frequence
VHF
-
LOW: 49 MHz -65 MHz/
HIGH: 104 MHz -300 MHz
-
Hyper
300MHz-470MHz
UHF
470 MHz -862 MHz
Canaux
VHF
-
LOW: 2-4
HIGH: 5-10 CATV
-
Hyper
CATV
UHF
21-69
Channel coverage
(PAL B/G)
Frequence
VHF
47 MHz -89 MHz/
104 MHz -300 MHz/
302 MHz -470 MHz
LOW: 47 MHz -89 MHz/
HIGH: 104 MHz -300 MHz
44.5MHz-143MHz/
143MHz-470MHz
Hyper
-
302 MHz -470 MHz
-
UHF
470 MHz -862 MHz
Canaux
VHF
-
LOW: E2-E4, X, Y, Z
HIGH: E5-E12,S1-S20,M1-M10,U1-U10
-
Hyper
S21-S41
UHF
E21-E69
Memory backup time Approx. 60 seconds
ACCESSORIES
Provided accessories RF cable,21-pin SCART cable,Satellite Controller,Infrared remote control unit,”AA” battery x 2
ATTENTION:
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the mains power
cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual.