JVC DR-MH50S, Инструкция по эксплуатации

Страница: 74 / 92

74
EN
SUBSIDIARY SETTINGS
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the
PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select A INITIAL SET UP B , then press
G
.
3
Press selection keys to select A TUNER SET B , then press
G
.
4
Press selection keys
to select A AUTO CH
SET B , then press
ENTER .
5
Press selection keys
to select your country’s
name, then press
ENTER .
6
Press selection keys
to select the language
of your choice.
7
Press ENTER twice.
●
When you have
connected the unit to a
TV offering T-V Link via
a fully-wired 21-pin
SCART cable
(
A
pg. 16), the unit
automatically performs
the Preset Download
and the T-V LINK
screen will appear.
(
A
pg. 18)
●
The Auto Set screen appears, and remains on screen while the
unit searches for receivable stations.
8
View the Confirmation screen.
A AUTO SET COMPLETED B or A SCAN COMPLETED B is
displayed on the TV screen. Select A OK B .
9
Press SET UP to complete the setting.
●
Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 75 – 76 for the procedures.
●
Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
●
For information on scrambled broadcasts, refer to A When
Receiving A Scrambled Broadcast B (
A
pg. 76).
NOTES:
●
Fine tuning is performed automatically during Auto Channel Set.
If you want to perform tuning manually, refer to
A Fine-Tuning
Channels Already Stored B (
A
pg. 76).
●
If you perform Auto Channel Set when the aerial cable is not
connected properly,
A SCAN COMPLETED -NO SIGNAL- B
appears on the TV screen in step 8 . In such a case, make sure of
the aerial connection and press ENTER ; Auto Channel Set will
start again.
●
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (
A
pg. 76,
A
INFORMATION
B ).
Tuner Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
IMPORTANT:
Perform the following steps only if
^
^
Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (
A
pg. 17, 18)
^
you have moved to a different area or if a new station starts
broadcasting in your area.
ENTER
SET UP
FGDE
CABLE/SAT
DVD TV
Selection Keys
13
12
11
AUTO CH SET MANUAL CH SET
SAT CONTROL SET GUIDE PROG SET
TUNER SET CLOCK SET
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
IMPORTANT:
●
In certain reception conditions, station names may not be
stored correctly, and Auto Guide Programme Number Set may
not work properly. When the Guide Programme numbers are
not set properly, the programme that you do not intended to
record will be timer recorded by the
a
system of the
unit. When programming the timer using the
a
system,
be sure to check the desired channel is selected correctly.
(
A
pg. 45)
●
Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (
A
pg. 75, A Delete A
Channel B )
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT