1-8 (No.YD073)
3.1.3 Remove the drive unit (See figure 4)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the front panel assembly.
(1) Disconnect the socket wire from connector
CN5301
on the
main board.
(2) Disconnect the card wire from connector
CN2201
on the
digital board.
(3) Remove the four screws
D
attaching the drive unit.
Fig.4
3.1.4 Remove the digital board (See figure 5)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the card wire from connectors
CN2201
,
CN1404
,
CN1103
on the digital board.
(2) Disconnect the socket wire from connectors
CN1101
,
CN1102
,
CN1801
on the digital board.
(3) Remove the four screws
E
attaching the digital board.
Fig.5
D
Drive unit
D
CN2201
D
D
CN5301
Digital board
Main board
CN2201
CN1404
Digital board
E
E
E
E
CN1103
CN1801
CN1101
CN1102
