Masterpage:Right-No-Heading
EN
101
Filename [DR-M10SE_11Subsidiary.fm]
Page 101
February 12, 2004 5:31 pm
When Receiving A Scrambled
Broadcast
A
Select the decoder mode.
Set “L-2 SELECT” to “DECODER”. (
B
Access the Confirmation screen.
Perform steps
and
page 99.
C
Select the position.
Press
rt w e
to select the channel position
broadcasting scrambled programmes, then press
ENTER
twice.
D
Change the decoder setting.
A
Press
rt
to select “DECODER”, then press
ENTER
.
B
Press
rt
to set “DECODER” to “ON”, then press
ENTER
.
E
Return to the Confirmation screen.
Press
RETURN
.
●
Repeat steps
–
as necessary.
F
Close the Confirmation screen.
Press
SET UP
twice.
Set Stations (A)
Set station names that are registered in your unit.
A
Select the item.
Press
rt w e
to select the item you want.
B
Access the Manual Channel Set screen.
Press
ENTER
twice.
C
Select the new station.
A
Press
rt
to select “ID”, then press
ENTER
.
B
Press
rt
until the new station’s name (ID) you want
to store appears, then press
ENTER
. Registered station
pg. 103, “TV Station And ID List”) appear
as you press
rt
.
D
Switch the stations.
Press
w e
to select “OK”, then press
ENTER
.
●
Repeat steps
–
as necessary.
E
Close the Confirmation screen.
Press
SET UP
twice.
INFORMATION
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcast as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A
Select a country in Eastern Europe in step
B
Press
rt
to select “TV SYSTEM” in step
C
Press
rt
to select appropriate TV System (D/K or B/G).
Perform steps
of “Manual Channel Set” on page 99
to access the Confirmation screen before continuing.
DR-M10SE_01.book Page 101 Thursday, February 12, 2004 9:08 PM
