JVC dla-rs400 Скачать руководство пользователя

Страница: 44 / 80

Color Profile

By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image

quality according to the movie you are viewing.

“Setting the Color Profile” (P. 31)

Color Management

Each of the colors is adjustable according to the user’s preference.

“Adjusting to the Preferred Color (Color Management)” (P. 33)

Color Temp.

For setting the color temperature of the video image.

When “Picture Mode” is set to “THX” and when “Color Profile” is set to “x.v.Color”, the setting is fixed at 6500K.

Preset

Setting

Description

Xenon 1 to Xenon 3

* Selectable when “Picture Mode” is set to

“Film” or “Cinema”.

Color temperature that reproduces the characteristics of a xenon lamp

used in cinemas.

Xenon 1: A light source color that is emitted by a film projector

Xenon 2: A light source color emitted by a projector used for digital

cinema

Xenon 3: A light source color that looks cooler than that of “Xenon

2”

5500K, 6500K, 7500K, 9300K

Increasing the value enhances the blue tone of the video image, while

decreasing the value enhances the red tone.

Custom 1 to Custom 3

The color temperature of video images can be adjusted manually and

saved as one of the three customized settings.

High Bright

Color temperature that gives priority to brightness.

Custom

Setting

Description

Gain Red, Gain Green, Gain Blue

Adjusts each color in the bright parts of the video image.

Setting range: -255 (reduces the red/green/blue tone) to 0

(enhances the red/green/blue tone)

Offset Red, Offset Green, Offset Blue

Adjusts each color in the dark areas of the video image.

Setting range: -50 (reduces the red/green/blue tone) to +50

(enhances the red/green/blue tone)

Gamma

You can adjust the output value of the projected image with respect to the video signal input.

“Adjusting the Output Value of the Projected Image (Gamma)” (P. 36)

Picture Tone

Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.

“Fine-tuning to the Preferred Gamma Setting” (P. 38)

Dark Level/Bright Level

You can adjust the image quality to produce a sharp contrast in the brightness.

“Fine-tuning to the Preferred Gamma Setting” (P. 38)

Adjust/Set

Содержание dla-rs400

















































































Результаты поиска

Содержание dla-rs400

Отзывы:

Похожие инструкции для dla-rs400

Бренды по названию

Популярные бренды

JVC dla-rs400, Инструкция по эксплуатации

Результаты поиска

Содержание dla-rs400

Отзывы:

Похожие инструкции для dla-rs400

Бренды по названию

Популярные бренды