JVC DLA-RS1, Инструкция по эксплуатации

Страница: 30 / 150

4
30
Setting Menu (Continued)
Settings
z
Changing the lamp power will not change the lamp time (lamp life).
z
The setting cannot be changed within approximately 90 seconds after this unit has been turned on.
z
Settings cannot be changed within approximately 60 seconds after they are made.
z
This can also be displayed from the remote control. (
p
P12
)
Install.>High Altitude Mode
a
High Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On Activate.
Off Do not activate.
Func.>Back Color
b
Back Color
Configures the screen colour displayed when there is no input signal.
Blue Sets screen colour to
A
Blue
B
.
Black Sets screen colour to
A
Black
B
.
Func.>Sleep Timer
c
Sleep Timer
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15 Switch to standby mode after 15 minutes.
30 Switch to standby mode after 30 minutes.
60 Switch to standby mode after 60 minutes.
Off Do not switch to standby mode.
Func.>D-ILA Logo
d
D-ILA Logo
Sets whether to display
A
D-ILA Logo
B
during startup.
On Displays for 5 seconds.
Off Do not display.
Func.>Lamp Power
e
Lamp Power
Configures the output of the light-source lamp.
Normal For normal circumstances, select this setting. (170 W)
High Select this when it is difficult to see the image in a bright room. (200 W)
Func.>Test Pattern
f
Test Pattern
Displays 6 types of test patterns.
DLA-RS1E_EN.book Page 30 Tuesday, February 26, 2008 10:43 AM