5
Connecting the Projector to a Network
Connect the projector to a network connection device (hub, etc.) via LAN cable.
Open the “Network” item under the “Function” tab in the menu.
If you want to use the DHCP server, set “DHCP Client” to “On”, and then press
“Set”. Acquisition of the IP address starts automatically.
If the IP address is designated by the network administrator, set “IP Address”,
“Subnet Mask”, and “Default Gateway” to the designated values.
After pressing “Set”, press OK to apply new settings.
* For details on the PC settings, refer to the instruction manual of the PC.
Procedures for setting up Windows10 are described in P. 19.
* For more details on the network, it is recommended that you refer to network-
related books.
* Settings may vary depending on the network device and control procedure for
the network to be connected.
* For details on the IP address and other settings, including whether the use of a
DHCP server is allowed, consult your network administrator.
Laptop, etc.
Server
Hub
Network
Connection Cable
(Sold Separately)
Projector
To [LAN] Terminal
