JVC DLA-HD10KSU/E, Инструкция по эксплуатации

Страница: 32 / 50

32
Adjustments and Settings Using Menus (continued)
C
Options Menu
................................................................................................
Menu Display
Adjusts the display duration of the menu screen.
●
The menu screen display will not disappear automatically
when this is set to
A
On
B
. Press the [EXIT] button to clear
the menu screen.
................................................................................................
Sleep Time
Sets the lapse time before automatically switching the
unit to the standby mode when there is no signal input.
................................................................................................
RC232C (bps)
Sets the communication speed (signal transmission
speed) when communicating with a computer using the
RS-232C terminal. Ensure that this is same as the rate
set at the computer.
................................................................................................
Zoom/Focus
Locks/Unlocks the power zoom/power focus functions of
the projection lens.
................................................................................................
Power Save
Switches the power (brightness) of the light-source lamp.
●
It is possible to lower the power (brightness) of the light-
source lamp when this is set to
A
On
B
, but the display will
appear darker than when this is set to
A
Off
B
.
●
Adjustment of settings will be disabled for about 1 minute
after the setting is changed. In this case, adjust settings
after a lapse of at least 1 minute.
●
Altering the
A
On
B
,
A
Off
B
setting does not affect the lamp
usage time (lamp life) of the light-source lamp.
D
Information Menu
................................................................................................
Lamp Time
Displays the accumulated hours of usage of the light-
source lamp.
................................................................................................
Source
Automatically identifies the input video signal at the [DVI]
terminal of this unit and displays the signal name
(
A
1080p50
B
or
A
1080p60
B
).
●
When there is no video signal input to the [DVI] terminal, or
when there is input of a video signal that cannot be used
with this unit, no signal name will be displayed.
Setting Values:
A
15sec
B
,
A
On
B
Default Value:
A
15sec
B
Setting Values:
A
15min
B
,
A
30min
B
,
A
60min
B
,
A
Off
B
Default Value:
A
Off
B
Setting Values:
A
9600
B
,
A
19200
B
Default Value:
A
19200
B
Setting Values:
A
Lock
B
,
A
Unlock
B
Default Value:
A
Unlock
B
Setting Values:
A
On
B
,
A
Off
B
Default Value:
A
Off
B
NOTES:
●
When the input video signal is switched, a blue back
image will appear for about 2 seconds.
●
When nothing is connected to the [DVI] terminal, or if
there is no video signal, a
A
No Signal DVI-D
B
message
will be projected.
●
For a video signal that cannot be used with this unit, a
A
Out of Range
B
message will be projected.
●
Video input signals that can be used with this unit are
1080/50p and 1080/60p signals by DVI-D.
DLA-HD10_EN-FR.book Page 32 Thursday, November 10, 2005 12:54 PM
Downloaded from ProjectorsManual.com Manuals