– 30 –
Notice you cannot use Program Play and Random Play
while playing a disc on CD Recorder.
Playing Back a Disc—Normal Play
You can play back both finalized and unfinalized discs on
CD Recorder.
On the remote control ONLY:
1
Press
0
CDR.
The unit automatically turns on and the CDR disc tray
comes out.
• If the sliding panel is closed, it moves down
automatically before the CDR disc tray comes out.
2
Place a disc correctly on the circle of the disc tray,
with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press CDR
3
/
8
.
The CDR disc tray also closes and CD Recorder starts
playing the loaded disc. The CDR lamps start flashing.
• If you press
0
CDR again in this step, the disc tray
closes, but playback does not start.
To close the CDR disc tray, press
0
CDR again.
To stop playback for a moment, press CDR
3
/
8
.
To resume play, press CDR
3
/
8
again.
To stop during play, press
7
.
To remove the disc, press
0
CDR on the unit.
• When you try to eject the unfinalized CD-R or CD-RW,
“FINALIZE ?” appears and flashes in the main display.
If you do not finalize the disc, press
0
CDR again.
If you do finalize the disc, press FINALIZE. (See also
“Finalizing a Disc—CD-R/CD-RW” on page 41.)
Good
No good
Elapsed playing time
Track number
Ex.: When an unfinalized CD-RW is loaded
CD-RW
UNFINALIZE DISC
3
2
1
CDR
Basic Disc Operations
To locate a particular point in a track during play
On the remote control:
Press and hold
¡
/
¢
or
4
/
1
.
On the unit:
Press and hold
¢
or
4
.
•
¡
/
¢
(
¢
): Fast-forwards the tracks.
•
4
/
1
(
4
): Fast-reverses the tracks.
To go to another track
On the remote control:
Press
¡
/
¢
or
4
/
1
repeatedly.
On the unit:
Press
¢
or
4
repeatedly.
•
¡
/
¢
(
¢
): Skips to the beginning of the next or
succeeding tracks.
•
4
/
1
(
4
) : Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Press the number button(s) allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Repeating Tracks—Repeat Play
You can repeat an individual track or all tracks in a disc
many times as you like.
On the remote control ONLY:
Press REPEAT repeatedly during or before playing.
• Each time you press the button, Repeat Play mode
changes and appears in the main display as follows:
• REPEAT 1CD:
Repeats all the tracks.
• REPEAT 1:
Repeats one track.
• REPEAT OFF:
Cancels Repeat Play.
Ex.: When “REPEAT 1CD” is selected
CD-RW
UNFINALIZE DISC
1CD
3
2
1
CDR
REPEAT OFF
REPEAT 1CD
REPEAT 1
(Canceled)
EN29-30_CA-NXCDR7R[B]_f
01.7.23, 10:00 AM
30