JVC CA-MXKC45, Инструкция по эксплуатации

Страница: 18 / 62

15
Using the CD Player
To Exit and Re-enter Program Play
The program you have made is stored in memory. So, you can exit
Program Play temporarily or re-enter Program Play unless you de-
lete the program.
To exit the program mode once , press the
7
button to stop
playing. The “PRGM” indicator goes off and the Program mode
will be canceled. The program is stored in the memory.
To re-enter Program Play mode
, press the PROGRAM but-
ton until the “PRGM” indicator lights up again.
• Tray will not open during the program playback.
Random Play
The tracks of the selected CD will play in no special order when
you use this mode.
1
In Stop mode, set the CD Player in Random
Play mode.
Press the RANDOM button to light the “RNDM” and “1 DISC”
indicator.
At the same time, “RANDOM” appears on the display.
Each time you press the button, the display changes as follows:
RANDOM
=
Normal display (Normal Play)
=
(back to the be-
ginning)
2
Press the CD
6
button.
The tracks on selected CD are played in random order.
To stop playing , press the
7
button. The Random mode is can-
celed and the “RNDM” and “1 DISC” indicator goes off.
To skip a track during playback , press the
¢
button to
jump to the next track in the random sequence.
• To use Repeat Play for Random Play, press the RANDOM but-
ton to display “REPEAT” and “1DISC” before starting play-
back. For details, see “Repeating Tracks” mentioned below.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
REPEAT 1
=
REPEAT 1DISC
=
REPEAT ALL
=
Normal dis-
play(Normal Play)
=
(back to the beginning)
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEAT
ï
Blank display
It repeats all the tracks in the program.
To stop playing
, press the
7
button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the Repeat indicator goes off.
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close
0
button on the Unit is pressed.
Locking the Tray
1
Turn on the System and enter CD mode.
2
While pressing down the
7
button, press the
CD Open/Close
0
button on the Unit.
“LOCKED” appears on the display.
• If you try to open the tray by pressing the CD Open/Close
0
button, “LOCKED” appears on the display to let you know that
the tray has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
Now, you can use the tray normally.
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
REPEAT 1: Repeats one track.
REPEAT 1DISC: Repeats all tracks on one CD. (Selectable in
Normal Play and Random Play)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
MX-KC45(J)_EN.book Page 15 Wednesday, January 11, 2006 3:21 PM