15
Using the CD Player
En
g
li
s
h
Random Play
The tracks of the selected CD will play in no special order when
you use this mode.
1
In Stop mode, set the CD Player in Random
Play mode.
On the Remote Control ONLY
Press the PROGRAM/RANDOM button until the “RANDOM”
indicator lights up.
Each time you press the button, the display changes as follows:
PROGRAM
=
RANDOM
=
Normal display (Normal Play)
=
(back to the beginning)
2
Press the CD
6
button.
The tracks on selected CD are played in random order.
To stop playing
, press the
7
button. The Random mode is can-
celed and the “RANDOM” indicator goes off.
To skip a track during playback
, press the
¢
button to
jump to the next track in the random sequence.
• To use Repeat Play for Random Play, press the PROGRAM/
RANDOM button on the Remote Control to display
“REPEAT” and “1CD” before starting playback. For details,
see “Repeating Tracks” mentioned below.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you like.
On the Remote Control ONLY
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as follows:
1
=
1CD
=
ALL
=
Blank display
=
(back to the beginning)
For Program Play
To stop playing
, press the
7
button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the “REPEAT” indicator goes off.
Resume Play for MP3 Disc
You can store the number of the track that you have stopped play-
back. By pressing CD
6
button, you can start playback again
from the beginning of the same track.
On the Unit ONLY
Press the
7
button for 2 seconds until “RESUME ON” scrolls on
the display.
To turn off the resume play,
press the
7
button for 2 seconds
until “RESUME OFF” scrolls on the display.
•
If you unplug the AC power cord
The resume play is back to on.
The following operations will erase the memory of the
track number that you have stopped playback when
• Pressing CD Open/Close
0
button to eject the disc.
• Pressing CD1-CD3 button or DISC SKIP button to change
the disc to play.
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
Locking the Tray
1
Turn on the System and enter CD mode.
2
While pressing down the
7
button, press the
CD Open/Close
0
button on the Unit.
“LOCKED” appears on the display.
• If you try to open the tray by pressing the CD Open/Close
0
button, “LOCKED” appears on the display to let you know that
the tray has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days.
REPEAT 1:
Repeats one track.
REPEAT 1CD:
Repeats all tracks on one CD. (Selectable in
Normal Play and Random Play)
REPEAT ALL:
Repeats all the tracks on all the CDs.
REPEAT:
Repeats all the tracks in the program.
LVT1346-001A_E.book Page 15 Wednesday, March 30, 2005 1:16 PM
