– 24 –
English
STANDBY
SLEEP
ZZZ...
PRESET
10
Canceled
20
30
60
90
120
TIMER
/CLOCK
CANCEL
DEMO
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the display.
• Each time you press the button, the time length changes
as follows:
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
• Recording Timer has priority over Daily Timer and
Sleep Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will not work (the SLEEP indicator
does not go off).
4
Set the on-time you want the unit
to turn on.
1) Press
4
or
¢
to set the hour, then
press SET.
2) Press
4
or
¢
to set the minute, then
press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the unit
to turn off (on standby).
1) Press
4
or
¢
to set the hour, then
press SET.
2) Press
4
or
¢
to set the minute, then
press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press
4
or
¢
to select the band
(“TUNER FM” or “TUNER AM”), then
press SET.
2) Press
4
or
¢
to select a preset channel
number, then press SET.
The REC indicator stops flashing and
remains lit. The settings you have done are
shown on the display in sequence.
7
Press
to turn off the unit (on
standby) if necessary.
If you want to listen to another source
while recording
Press REC START/STOP to stop recording. Without stopping it, you
cannot change the source.
To turn on or off Recording Timer after its setting is
done
1
Press TIMER/CLOCK repeatedly until
“REC” appears on the display.
2
To turn off the Recording Timer, press
CANCEL.
The REC indicator goes off from the display.
The Recording Timer is canceled, but the
setting for the Recording Timer remains in
memory.
To turn on the Recording Timer, press SET.
The REC indicator lights up on the display.
The settings you have done are shown on the
display in sequence for your confirmation.
SET
SEA CONTROL
SET
SEA CONTROL
PRESET
PRESET
SET
SEA CONTROL
SET
SEA CONTROL
Recording Timer
7:00
6:30
Sleep Timer
7:30
does not work.
Recording Timer
6:00
7:30
7:00
6:30
Daily Timer
6:00
does not work.
EN19-26.MXJ55/530R[E]/2
99.2.19, 6:02 PM
24
