background image

– 10 –

English

Adjusting the Volume

You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted in 32 steps (VOL MIN,
VOL 01 — VOL 30, and VOL MAX).

Turn  / – clockwise (+) to
increase the volume or
counterclockwise (–) to decrease it.

When using the remote control, press  to increase
the volume or press VOLUME – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.

DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.

To turn down the volume level temporarily

Press FADE MUTING on the remote control.
The volume level gradually decreases to
“VOL MIN.”

To restore the sound, press the button again.

Reinforcing the Bass Sound

You can select one of the 4 subwoofer levels. This function
only affects the playback sound, but does not affect your
recording. The subwoofer level can be adjusted in 4 steps —
LEVEL 1, LEVEL 2, LEVEL 3, and LEVEL 4 (MAX
LEVEL).

Turn SUBWOOFER LEVEL + / –
clockwise (+) to increase the subwoofer
sound or counterclockwise (–) to
decrease it.
When using the remote control, press
SUBWOOFER LEVEL + to increase the subwoofer volume
or press SUBWOOFER LEVEL – to decrease it.

Selecting the Sound Modes

You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA — Sound Effect Amplifier — modes). This
function only affects the playback sound, but does not affect
your recording.

To select the sound modes, turn
SOUND MODE (or press
SOUND MODE on the remote control)
until the sound mode you want appears on
the display.

• The sound modes change as follows:

* When using the remote control, the sound mode changes in

only one direction.

Surround modes**:
D.CLUB
:

Increases resonance and bass.

HALL:

Adds depth and brilliance to the sound.

STADIUM: Adds clarity and spreads the sound, like in an

outdoor stadium.

SEA (Sound Effect Amplifier) modes:
ROCK
:

Boosts low and high frequency. Good for
acoustic music.

POP:

Good for vocal music.

CLASSIC: Good for classical music.

Manual modes:
MANUAL 1/2/3
:

Your individual mode stored in memory. See
“Creating Your Own Sound Mode — Manual
Mode” on page 11.

OFF:

The sound mode is canceled. The SOUND
MODE indicator goes off.

** Surround elements are added to the SEA elements to create a

being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as — 

While one of the SEA modes including manual modes (SEA
elements without surround elements) is selected, the SOUND
MODE indicator lights up as — 

Continued

SUBWOOFER indicator always lights up
when the unit is on.

D.CLUB

(Dance club)

OFF

(Canceled)

HALL

STADIUM

ROCK

POP

CLASSIC

MANUAL 1

MANUAL 2

MANUAL 3

*

The SOUND MODE indicator
also lights up on the display.

EN01-12.CA-MXGT95/85/75[US,UY]2

31/07/2001, 10:36 am

10

Содержание CA-MXG75V























































Отзывы: