(No.MB004)1-13
3.1.10 Removing the regulator board
(See Fig.15)
• Prior to performing the following procedures, remove the rear
cover, bottom case (A), bottom case (B), top case assembly,
tuner, function board, micon board, digital amplifier board and
power supply board.
(1) From the side of the power supply board, remove the two
screws
Q
attaching the regulator board.
(2) Disconnect the regulator board from the connector
CN931
on the power supply board in the direction of the arrow.
Fig.15
3.1.11 Removing the FL board
(See Fig.16)
• Prior to performing the following procedures, remove the rear
cover, bottom case (B) and top case assembly.
(1) From the top side of the main body, disconnect the card
wire from the connector
CN751
on the FL board.
(2) Remove the screw
R
attaching the FL board.
(3) Release the two engagement sections
i
of the bottom
chassis, take out the FL board.
Fig.16
Q
CN931
Power supply board
Regulator board
Q
R
CN751
Card wire
FL board
Engagement
section
i
Engagement
section
i
Содержание CA-FSX1
Страница 29: ...2 11 M E M O ...
Страница 51: ... M E M O ...