13
English
Using the Tuner
You can listen to FM and AM stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
❑
Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See pages 5 and 6).
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: 9 kHz except for South and Central
America). You can change it to 10 kHz or 9 kHz spacing.
To select 10 kHz intervals,
while holding down the
¢
button on the Unit in Standby mode, press the STANDBY/
ON
button on the Unit to turn on the power. “AM
10kHz STEP” will appear on the display.
To select 9 kHz intervals,
while holding down the
4
button on the Unit in Standby mode, press the STANDBY/
ON
button on the Unit to turn on the power. “AM 9kHz
STEP” will appear on the display.
• When you change the setting, the preset AM stations are
erased. You will need to preset the station again. (See
page 14.)
One Touch Radio
Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.
❑
You can switch from any other sound source to the radio
by pressing the FM/AM button.
Tuning In a Station
1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
• You can also select the band by turning the Source
selector on the Unit.
2
Select a station using one of the follow-
ing methods.
●
Manual Tuning
Press the
¢
or
4
button on the Unit or the
5
or
∞
button on the Remote Control repeatedly to move
from frequency to frequency until you find the station
you want.
OR
●
Auto Tuning
If you press and hold the
¢
or
4
button on the
Unit or the
5
or
∞
button on the
Remote Control
for one second or more, the frequency changes up, or
down, automatically until a station is found.
OR
5
2
FM/AM
Multi-control
button
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
SET
FM/PLAY MODE
3
∞
Numeric
Keys
Source
selector
¢
4
FM mode indicator
Band display, Preset channel,
Frequency display
(9 kHz interval)
(10 kHz interval)
(On the Remote Control)
(On the Unit)
FS-X1-3(US)_E.book Page 13 Friday, April 18, 2003 7:27 PM
