background image

– 6 –

Getting Started

Supplied Accessories

Make sure that you have all the following items.
The number in the parentheses indicates the quantity of the
pieces supplied.

• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)

If anything is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries — R6(SUM-3)/AA(15F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.

1

3

• DO NOT use an old battery together with a

new one.

• DO NOT use different types of batteries

together.

• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery

compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, it will be damaged from
battery leakage.

R6(SUM-3)/AA(15F)

Connecting Antennas

FM antenna

Continued

2

1

Attach the FM antenna to the FM 75 

COAXIAL terminal.

2

Extend the FM antenna.

3

Fasten it up in the position which gives you
the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

FM antenna (supplied)

Outdoor FM antenna
(not supplied)

A 75 

 antenna with coaxial type connector should be

used.

AM EXT     

       AM LOOP

FM 75     

COAXIAL

ANTENNA

FM 75     

COAXIAL

ANTENNA

AM EXT

               AM  LOOP

Coaxial cable

EN01-11.FS-P5[J]

01.4.17, 9:44 AM

6

Содержание CA-FSP5





























Отзывы: