1-14 (No.MB396)
3.1.9 Removing the micom board
(See Figs.16 and 17)
• Remove the top cover, AL panel L, AL panel R, front panel as-
sembly, rear panel, switching power unit and main board.
(1) From the top side of the main body, disconnect the card
wires from the connectors (
CN631
and
CN701
) on the mi-
com board. (See Fig.16.)
(2) Disconnect the card wire from the connector
CN705
on the
micom board and take out the tuner after releasing the
claws
g
of the tuner holder. (See Fig.16.)
Reference:
Remove the tuner as required.
(3) Disconnect the wire from the connector
CN311
on the dig-
ital amplifier board assembly. (See Fig.16.)
(4) Disconnect the card wire from the connector
CN601
on the
main board. (See Fig.17.)
(5) Remove the two screws
S
and screw
S'
attaching the mi-
com board. (See Fig.17.)
Reference:
• When attaching the screw
S'
, attach the bracket D with it.
(See Fig.17.)
• When attaching the micom board, attach the screw
S
and
screw
S'
after fitting the holes of the main board to the joints
(
h
,
i
,
j
,
k
) of the main body. (See Fig.17.)
Fig.16
Fig.17
Card wires
Card wire
CN631
CN701
CN311
Wire
Tuner
CN705
g
Tuner holder
Digital amplifier board assembly
Micom board
Micom board
Bracket D
h
S'
Micom
board
i
Micom board
j
S
S
Micom board
k
CN601
Card wire
Содержание CA-EXA5
